其他功能
| MAC 地址表 |
1000 entries |
| 光纤类型 |
SC |
| 全双工传输 |
Y |
| 格式要素 |
19" |
| 遵守工业标准 |
IEEE 802.3 10 BaseT & IEEE 802.3u 100 Base TX/100 Base FX |
性能
| 缓冲区大小 |
48 KB |
| 最大传输距离 |
2000 m |
| 波长 |
1310 nm |
另外
| 数据传输率（最大） |
200 Mbit/s |
| 连接方式 |
Wired |
Media Converter, 10/100 to 100FX Multi Mode 2KM-SC, 850nm /1310nm, 2km, IEEE 802.3 10 BaseT & IEEE 802.3u 100 Base TX/100 Base FX
- Compliant with IEEE 802.3 10 BaseT and IEEE 802.3u 100 Base TX/100 Base FX Standards.
- One 10/100 Base TX Ethernet TP Port and One 100 Base FX Ethernet Fiber Port.
- One 100Base FX Fiber Port can support either Multi (SC/ST) or Single (SC, LC, MT-RJ) Mode.
- TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation.
- Providing a slide switch for Full- and Half-Duplex selection on FX Port.
- Multiple Fiber Connectors.
- Providing 19" Converter Chassis for up to 16 slots with redundant power supply for optional expansion use.
Best media conversion solutions for network connectivity
Edimax's full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Ethernet / Fast Ethernet network implementation.
Migrating between copper and fiber-based Medium
ET-912+ series convert the signals between two different transmission medium, allowing user a simple and cost-effective method to migrate between UTP cable and fiber optic cable. It can transmit signals up to 2km (multimode) and 30/40/60/80/100km (single-mode) in fiber medium, allowing users to
extend network.
Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10 Base-T and 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch and one fiber connection to connect a 100 Base-FX device.
Built in Switching ASIC
ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking and filtering.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fiber port and TP port work normally when thunder storm or power unstable occuring cause the power electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.
