另外
| 数据传输率（最大） |
200 Mbit/s |
| 连接方式 |
Wired |
HP-2001AV 200Mbps PowerLine Ethernet Adapter
-Complies with 200Mbps HomePlug AV and IEEE 802.3 / 802.3u Standards
-Uses the electrical wire to transmit data like an Ethernet network
-Supports 128-bit AES link encryption to secure Powerline data transmission
-Easy Installation and transmission ranges up to 300 meters
USE THE EXISTING POWER LINE
HP-2001AV turns the existing electric wires in your home or office into a high-speed network. You do not have to install the network cables and be annoyed with the cables planning-- just use the wires that already run through the building! HP-2001AV enables you to create a network easily and cost-effectively.
200MBPS HOMEPLUG AV STANDARD
HP-2001AV complies with the HomePlug AV mode standard . HomePlug AV represents the next generation of technology which providing high speed 200Mbps data rate and coverage range up to 300 meters. People will be able to transfer high-definition video and digital audio by simply connecting the device to an electrical outlet.
COEXISTENCE WITH HOMEPLUG 1.0 & 1.0 TURBO
HP-2001AV is designed to ensure efficient coexistence with the HomePlug 1.0 and 1.0 Turbo devices . User can use HP-2001AV and HomePlug 1.0 stations to share the CSMA/CA allocation , thus providing fair access to HomePlug 1.0 stations based on traffic priority .
SUPPORT QoS &128-bits AES ENCRYPTION
HP-2001AV not only provides Quality of Service (QoS) guarantees including guaranteed bandwidth reservation, high reliability and tight control of latency, but also supports 128-bits AES link encryption for security. It is a good choice for you to create a new network or to rearrange of the existing network.
SUPPORT GROUP BUTTON & RESET BUTTON
HP-2001AV provides hardware "Group Button" and "Reset Button" for you to simplify the configuration. The "Group Button" can help you to create several powerline network groups in LAN . The HomePlug devices in different groups can not communicate with each other via powerline. Press the "Reset Button" for 3 seconds to reset the configuration to factory default.
