Ei Electronics Ei128R Interconnectable Surface-mounted

240V, Ø141 x 21mm, 155g, No battery back up <b>Product Description</b>
Product Description The Ei128R Pattress has an integral relay that is activated when the Smoke/Heat Alarm connected to the Ei128R enters alarm mode.

The relay contacts are isolated and are rated at 250VAC, 5A resistive, and can be used for signalling, turning on lights and sirens or activating door release devices etc.

The Ei128R has an additional socket for connecting to the “R” spade terminal on the Ei161R or Ei166R Smoke Alarm. This socket can be used for remote control of the attached Alarm, such as Test/Hush via the Ei152, or a MCP400 Manual Call Point.

The Ei128R Pattress is designed to be used with the Easi-Fit Smoke and Heat Alarms. In addition, the Ei128COV is a plastic lid for the Ei128R that allows the unit to be sited remotely to the Smoke or Heat Alarm, and will also allow non Easi-Fit Alarms to be connected to the Ei128R

The Ei128R Pattress is designed so that any of the alarms listed above will fit on top of the Ei128R.

The Ei128R Pattress must only be used with one of the Smoke/Heat Alarms listed above – otherwise the unit will not comply with the mandatory safety regulations.