Ei Electronics Ei186 Optical detector Interconnectable Wired White

Optical, 85 dB, 10.5-30 VDC, Ø 145 mm, White The Ei186 is a smoke alarm that is designed to operate with suitable 10.5-30 volt control panels and to provide a loud local alarm. It senses smoke using the light scatter principle, giving a quick response to visible smouldering fires

The Ei186 has advanced features such as the ability to interconnect up to twelve alarms to allow all alarms to sound if just one of the interconnected alarms should be triggered.

Relay contacts (normally open and closed supplied) are available for triggering the panel itself and its associated ancillary products, such as extra loud sirens, magnetic door holders etc.

The Ei186 is easily installed and comes supplied with all necessary screw fixings.

- The smoke detector will activate the built in sounder upon sensing smoke particles
- The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber
- The built in sounder will provide a minimum sound output of 85dB at 3m
- The “Test/Hush” button will silence nuisance alarms if any
- The “Test/Hush” button will test detector circuitry, sounder, relay and activate all interconnected alarms

- High sensitivity – responds to all standard fires
- Relay contacts rated at 30VDC/1 AMP
- Power supply voltage 10.5-30VDC
- Interconnect up to 12 other alarms
- Circular Easy-Fit mounting base for quick
- installation
- Alkaline battery back up
- Low battery warning
- Built in sounder
- Test/hush button
- Kitemarked to BS EN14604:2005
- 5 year guarantee