Ei Electronics Ei261MEN

Ei Electronics Ei261MEN

发送方式:
交货来源:
德国
更新价格... 📣 询问价格 Не поставляется
运输成本:
От

凡购买和价格 (Advertising *)

顶部
в наличии
* Alle Preise inkl. der jeweils geltenden gesetzlichen Mehrwertsteuer, ggfs. zzgl. Versandkosten. Alle Angaben ohne Gewähr. Preisänderungen sind in der Zwischenzeit möglich.

技术特点

顶部

电池

后备电池 Y
可充电电池 Y

产品特点

噪音水平 85 dB
Ei261ENRC, CO Alarm - Remote System Control capability
- Easi-fit base
- Proven electrochemical sensor
- Tamper-proof rechargeable Lithium battery back-up
- Unique easy to replace sensor module
- Memory feature records if CO has been detected
- Easy to use Test/Hush button
- Automatic self diagnostics
- Pre alarm led flashes at 50ppm CO
- Loud distinctive alarm (85 dB(A) at 3 metres)
- Power, alarm and fault indicator lights
- End of life indicator
- Interconnectable to other Ei mains powered alarms
- Fast CO test mode
- Kitemarked to BSEN 50291:2001
- 5 Year guarantee (limited)

The Ei261ENRC is a Carbon Monoxide(CO) alarm powered by 230V AC mains power, and has built in tamper proof rechargeable Lithium cells that act as a battery back up in the event of mains failure. These rechargeable Lithium cells are designed to have a ten-year life and outlast the life of the CO alarm. They will provide up to 4 weeks of CO alarm operation without mains power. The green indicator will illuminate to show mains power is present The horn will sound and the red indicator will flash at different speeds to indicate the presence of various levels of CO gas – slow flash indicating low levels and rapid flash to indicate high levels

The Ei261ENRC also has Remote Control capability - allowing the alarm to be controlled remotely from a Control Switch (Ei1529RC). This then allows remote Test, Locate and Hush functions to be performed. If the Ei261ENRC is also interconnected to other Ei „RC‟ mains powered alarms, then the whole system can be controlled remotely. Up to twelve alarms can be interconnected. A Manual Call Point (MCP401RC) is also available.

The Ei261ENRC is supplied with an Easi-Fit base that allows very quick and simple installation of the alarm, combined with simple removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the alarm slides on to the base.

The Ei261ENRC uses a high performance electrochemical sensor to sense CO presence. The sensor can be replaced after 5 years to provide a combined 10 year protection against CO gas.

The Ei261ENRC has built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms.
Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    产品目录
    取消
    Бренды:
      Выберите бренды
        查看更多
          地區搜索
          全球
          Категории
            产品名称