产品特点
| RF 射频传输频率 |
150 m |
| 按钮数量 |
3 |
| RF 射频传输范围 |
868 MHz |
Wireless Remote Control Switch, 150m, 212g
- When an alarm in the system is activated the red light will flash twice per second to indicate a fire.
- In House-Code mode, the amber indicator flashes to indicate the unit is transmitting its House Code signal
- When the alarm system is sounding, the “Locate” switch will audibly identify the alarm that has
- triggered the system by causing all other alarms to stop sounding for approximately 10 minutes
- Pressing the “Hush” switch will silence any nuisance alarms in the system for approximately 10 minutes
- Pressing the “Test” switch will cause all the alarms in the system to sound and is the equivalent of pressing the test buttons on all alarms simultaneously
- Alarm memory – When an alarm is activated it will be recorded in it’s memory. Pressing the “Locate” switch will cause the Fire Light to flash if a recorded alarm state is detected.
- Pressing the “Locate” & “Hush” button simultaneously for 5 seconds will erase the memory.