产品特点
| 固定温度点 |
58 °C |
| 探测器类型 |
Fixed temperature heat detector |
| 警钟分贝 |
85 dB |
| 测试按钮 |
Y |
| 互连 |
Y |
Thermistor, 9V, 58°C, 85 dB, 200 g, Ø 115 mm, White
The Ei603TYC alarm is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations where smoke detectors are prone to nuisance alarms.
The Ei603TYC has a 10 Year Lithium battery that is non replaceable.
The Ei603TYC should always be interconnected to other smoke alarms in the dwelling or escape routes to ensure that all occupants are alerted to the danger.
The Ei603TYC modular design allows it to be upgraded for RadioLINK functionality with the addition of an RF module.
Up to 12 battery powered smoke and heat alarms may be linked using hardwire or RF connectivity.
RadioLINK enabled smoke and/or heat alarms can be house coded as a system to prevent communication with other nearby RadioLINK systems.
- The heat detector will alarm when the temperature 0 reaches 58 C. It will automatically reset and silence the alarm when the temperature drops below this limit.
- The red indicating LED will flash once every 40 seconds to show that the alarm is powered and it has performed an automatic power supply test..
- The built in sounder will provide a minimum sound output of 85dB(A) @ 3m.
- Pressing and holding the “Test” button will check the sensor, electronics and sound the horn.
- The alarm is not powered until it is twisted on the mounting base, thus avoiding battery power consumption during storage and prior to installation.
- When used in a RadioLINK configuration, Ei603TYC heat alarms and other RadioLINK smoke alarms must be house coded. This will avoid interference and interconnection with other RadioLINK systems.
- Keep all doors closed to rooms with heat alarms at night and while premises are unoccupied.
- Practically eliminates false alarms
- Suitable for Kitchens & areas where smoke alarms
- may be subjected to false alarms.
- Aesthetically pleasing, compact design
- Battery capacity is sufficient to outlast the useful
- lifespan of the alarm.
- Large Easy to use Test button
- Interconnect up to 12 battery powered alarms
- Easy to fit twist-on base
- Optional upgrade to enable RadioLINK
- interconnect
- Kitemarked to BS 5446-2:2003
- Manufactured in Ireland to ISO 9001:2000
