Eltako FAFT60 Silver wall transmitter

FAFT60 - Wireless Outdoor Humidity Temperature Sensor, IP54, 60x46mm, Silver Wireless outdoor humidity temperature sensor, 60x46mm, 30mm deep.

The electronic requires no intrinsic power supply, so there is no standby loss.
The wireless outside humidity temperature sensor FAFT60 powered by a solar module continuously
measures the relative air humidity between 0 and 100% (±5%) and temperature between -20
and +60°C (±0.5°C). Of course, it performs these functions not only outdoors but also indoors,
provided the brightness is sufficient.

A wireless telegram is sent to the Eltako wireless network when humidity changes by 2% and in
case of a temperature change of 0.6°C. If readings remain constant, a control message is sent
every 100 to 3000 seconds, depending on the charge state of the sensor.

To teach-in in an actuator in teach-in mode, hold the supplied blue magnet or any other
magnet at hand below the point on the side panel of the sensor marked by. This sends
a teach-in telegram.

Solar-powered energy accumulator:
Before startup the energy accumulator must be charged.
The charge time is approx. 5 hours at 400 Lux. Keep the cover of the solar cell clean!

The protection class is IP54, the allowable ambient temperature is -20°C to +55°C.

For screw mounting or attachment with adhesive. The scope of supply comprises an adhesive foil.