联网
全双工传输 |
Y |
网路功能 |
Fast Ethernet, WLAN |
遵守工业标准 |
802.11b/g, 802.3/802.3u |
管理功能
媒体接入协议 |
CSMA/CA(ACK) |
数据链路协议 |
TCP/IP |
网上管理 |
Y |
支持的协议 |
FCC, ETS |
无线局域网的特点
频道/通道 数量 |
13 channels |
频段 |
2.412 - 2.484 GHz |
开放空间最大射程 |
200m |
数据传输
支持数据传输率 |
10/11/108/100Mbps |
另外
室内最大射程 |
50m |
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
ENRXWI-SG, 802.11b/g, 802.3/802.3u, 108/100Mbps, 2412 - 2484 MHz, FCC, ETS
<b>Super-G Wireless Repeater</b>
Encore Super-G Wireless LAN Extender is a multifunctional wireless device. It functions in three modes: Extender, Access Point and Access Point Client. The Extender mode offers a simple and cost-effective way to expand the coverage area of your Super-G wireless network. It operates at a blazing speed of up to 108 Mbps.
<b>Extender Mode</b>
Place ENRXWI-SG within the range of your current wireless network. Subsequently, ENRXWI-SG can pickup signal from the wireless router (or access point) and transfer the signal further away than the original coverage area. You have thus effectively extended your wireless network without wiring or complicated configuration. Also, you can improve the reception at dead spots, areas characterized by poor signal quality, by placing ENRXWI-SG between the dead spots and the wireless router.
<b>Access Point Mode</b>
Connect ENRXWI-SG to your wired Ethernet router (using a RJ-45 cable). Configure ENRXWI-SG accordingly. Now, you have just upgraded your old wired router into a wireless Super-G router.
<b>Access Point Client Mode</b>
Connect ENRXWI-SG to the Ethernet port of you desktop or laptop computer (using a RJ-45 cable). Configure ENRXWI-SG accordingly. Now, you can use it like a Super-G wireless adapter enabling your computer to access wireless network.
Use ENRXWI-SG, in Extender Mode, to increase your wireless coverage over an extended area such as in a warehouse, multi-story house and public space. You can also use it in wireless hot spot or outdoors where you always need additional coverage for your wireless network. Encore Wireless Super-G LAN Extender is compatible with both 802.11b and 802.11g standards. For your protection and convenience, ENRXWI-SG comes with strong security features such as WPA-PSK, WPA2 and web-based configuration utility.
- Features 3 Operation Modes: Extender (or Repeater), Access Point and Access Point Client;
- Increases the coverage area of Super-G or 802.11b/g wireless networks in Extender Mode without additional wiring;
- Features strong wireless security: WEP, WPA, WPA-PSK, WPA2 and WPA-PSK2;
- Features web-based configuration tool;
- Backward compatible with 802.11b/g.