性能
| 接收机灵敏度 |
IEEE802.11n(2RX)\nMCS0/8 @ -91dBm • MCS7/15@ -74dBm\nIEEE802.11g (2RX)\n6Mbps@ -92dBm • 54Mbps@ -75dBm\nIEEE802.11b (1RX)\n1Mbps@ -93dBm • 11Mbps@ -91dBm |
| 2.4 GHz |
Y |
| 频段 |
2.4 GHz |
| 以太网的数据传输率 |
10, 100 Mbit/s |
端口 & 界面
| 广域网接口 |
Ethernet (RJ-45) |
| DC-IN插口 |
Y |
其他功能
| 连通的液晶显示器 |
Y |
| 无线技术 |
WMM |
| 液晶显示器功率 |
Y |
天线
| 天线类型 |
2 Peak |
| 天线增益水平（最大值） |
2 dBi |
协议
| 动态主机配置协议客户 |
Y |
| 动态主机配置协议服务器 |
Y |
另外
| 数据传输率（最大） |
300 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
300Mbps Wireless N Range Expander
The Wireless N Range Extender is the easiest way to extend wireless coverage in your home or small office without running cables. Just put it in between your main access point or wireless router and the dead spot in your area that you want to cover with the wireless signal. It is designed to “repeat” signals into the far, hard-to-reach areas of your home or office. Eliminating the need to run cables allows you to build a wireless network in a most cost effective way.
Wide Compatibility
The Wireless-N Range Expander works with most Wireless access points and wireless routers, and is compatible with Wireless-B, Wireless-G and Wireless-N devices so you'll get the benefits of increased coverage even with a mixed network.
Easy Configuration
Installation is a snap with Push button Setup. Just plug it in and press the button. The Expander is designed to find your wireless network and configure itself automatically. There is also an easy to use installation wizard for more complicated setups.
