技术细节
| 信号-噪声比(信噪比) |
90 dB |
| 带宽 |
10.2 Gbit/s |
| 类型 |
AV transmitter |
端口 & 界面
| DVI输出端口 |
1 |
| DVI输入端口 |
1 |
| RS-232 输出端口 |
1 |
| RS-232 输入端口 |
1 |
| RJ-45输出端口 |
1 |
重量和尺寸
| 接收器尺寸（宽 x 深 x 高） |
109 x 152 x 25 mm |
| 接收器的重量 |
500 g |
| 发射器重量 |
300 g |
| 发射器尺寸（宽x深x高） |
109 x 76 x 25 mm |
10.2 Gbps, 300 MHz, 4096 x 2160, RJ-45, DVI-D, 20 - 20000Hz, 90dB, RS-232, 100 - 240V
The Extron DTP DVI 4K 230 Tx is a transmitter for sending DVI-D video, audio, and bidirectional RS‑232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP®‑enabled products. It provides an economical and effective means for extending single link DVI-D or HDMI signals. In addition, the DTP DVI 4K 230 Tx accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K. The transmitter is equipped with a buffered DVI loop-through output to support a local computer monitor. The compact enclosure size and remote power capability make the DTP DVI 4K 230 Tx ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.
The DTP DVI 4K 230 Tx enables the reliable transmission of DVI‑D signals, and is fully compatible with HDMI signals when used with the appropriate DVI-HDMI adapters from Extron. The twisted pair transmitter can extend HDMI signals, supporting Deep Color up to 12-bit, CEC pass-through, and embedded HD lossless audio formats. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The DTP DVI 4K 230 Tx also provides a connection for sending stereo analog audio to a DTP‑enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the DVI‑D and control signals, eliminating the need for a separate cable run to support analog audio at the DTP‑enabled product.
The twisted pair transmitter provides other convenient, integrator-friendly features designed to help simplify installation. The DTP DVI 4K 230 Tx supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. Also, the transmitter can be remotely powered over the shielded twisted pair cable by a DTP‑enabled product, allowing both devices to share one power supply.
The DTP DVI 4K 230 Tx can be integrated with an Extron DTP CrossPoint® Presentation Matrix Switcher, or other DTP-enabled products to support sources at remote locations. The transmitter is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low profile design of the DTP DVI 4K 230 Tx allows for discreet placement in lecterns and beneath tables.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.
