存储介质
热插拔驱动器托架 |
Y |
单磁道搜索时间(读/写) |
11 ms |
硬盘转速 |
7200 RPM |
安装存储总容量 |
2000 GB |
存储驱动器容量 |
10000 GB |
存储驱动器安装数目 |
2 |
其他功能
连接/工作 LED |
Y |
便宜磁盘的冗余式阵列控制器类型 |
1 Gb |
连通的液晶显示器 |
Y |
主机接口 |
RS232 |
最大存储容量(含扩展罩) |
56 TB |
网路功能 |
Gigabit Ethernet |
性能
噪音水平 |
47 dB |
管理协议 |
SNMP |
网上管理 |
Y |
FibreCAT SX80 iSCSI, 2TB, 2U, 12 Drives, SATA II, RAID 0/1/10/3/5/50/6, SNMP, Gigabit Ethernet, RS232
FibreCAT SX80 iSCSI
The FibreCAT SX80 iSCSI is the perfect system for the data centre. It offers up to 56 TB of storage capacity with 1-5 enclosures with up to 56 disks (SATA-II or SAS). Optionally the system can be
equipped with a second iSCSI RAID controller. The FibreCAT SX80 iSCSI offers enterprise class reliability as well as snapshot functionality. All this comes at a very affordable price. All critical components (RAID controller – in the case of dualcontroller-systems, fans, power supplies, disks) are redundant and can be replaced during operations. FibreCap™ technology protects the RAID controller cache in case of power failure. The FibreCAT SX80 iSCSI is a fast storage system. This comes from the Gigabit Ethernet technology, the fast 15k rpm SAS disks, as well as from FibreCache™, which uses a high performance interconnect to synchronize RAID controller caches directly.
- Redundant RAID controllers, fans and power supplies that are hot swappable;
- FibreCap uses capacitor technology instead of batteries to protect RAID controller cache during power outages. This permits the array to return to high performance mode within minutes following restore versus hours;
- A vast number of RAID levels.
- FibreCache is a high performance interconnect that keeps RAID controller caches synchronized;
- Gigabit Ethernet technology;
- SATA II and 15K rpm SAS disk drives.
- Preloaded management software with intuitive web interface;
- Integrated with Microsoft Virtual Disk Services (VDS).
- For heterogeneous environments and for PRIMERGY, PRIMEPOWER and PRIMEQUEST;
- Perfect for many scenarios (storage consolidation, clustering, tiered storage, backup-to-disk, VMware, etc.).
- 4 build-in snapshots as a standard;
- Possibility to upgrade from 4 to 32 snapshots;
- Integration withWindows Volume Copy Shadow Services (VSS).
- iSCSI boot – only with SAS disks released.