数据传输
MAC 地址表 |
16000 entries |
存储转发 |
Y |
支持数据传输率 |
10/100/1000 Mbps |
最大数据传输率 |
10 Gbit/s |
VLAN 数量 |
1000 |
其他功能
等待时间 |
8µs |
带宽 |
152 Gbit/s |
无线局域网连接 |
N |
网路功能 |
Gigabit Ethernet |
管理功能
支持管理信息基本原则 |
Private-MIB, RMON-MIB |
系统事件日志 |
Y |
网上管理 |
Y |
联网
端口镜像 |
Y |
广播风暴控制 |
Y |
IGMP侦听 |
Y |
自动 MDI / MDI - X 检测功能 |
Y |
链路汇集 |
Y |
生成树协议 |
Y |
流量控制支持 |
Y |
动态主机配置协议客户 |
Y |
10G支持 |
Y |
全双工传输 |
Y |
安全
静态接口安全 |
Y |
SSH / SSL支持 |
Y |
MAC(媒体存储控制)地址过滤 |
Y |
存取控制清单(ACL) |
Y |
协议
支持网络协议 |
IPv4, IPv6, FTP, TFTP, BOOTP, SNTPv4, CDPv2, GVRP, GARP, GMRP, VTPv1/v2 |
数据链路协议 |
LLDP |
管理协议 |
IGMPv1/v2/v3, CLI, SNMPv1/v2c/v3 |
性能
可堆叠 |
Y |
内置存储器 |
512 MB |
闪存 |
64 MB |
端口 & 界面
基本交换 RJ-45 以太网端口数量 |
8 |
光纤通道端口 |
2 |
以太网铜缆技术 |
100BASE-TX, 1000BASE-T, 1000BASE-TX, 100BASE-T, 10BASE-T |
Primergy BX/IBP 1GB 36/8+2, Gigabit Ethernet, L2+, 8 x RJ45, 2 x 10Gb SFP+, VLAN, DHCP, 16K MAC, CoS, ACLs, CLI, 74W, 1.36kg, Grey
Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
PRIMERGY BX Connection Blades simplify network connectivity for PRIMERGY BX Blade Servers, ensuring fast, reliable and flexible access to data and storage networks. All Connection Blades are integrated within the BX chassis and benefit from a high-speed midplane as well as from energy-efficient power and cooling. A wide range of different Connection Blades are available to address current and next-generation I/O requirements for standards-based Fibre Channel, InfiniBand and Ethernet networks. PRIMERGY BX400 system units support up to 4 Connection Blades, PRIMERGY BX900 up to 8, thus implementing flexible and scalable connections in order to meet the requirements arising from dynamic workloads.
Today’s technological specifications offer speeds of up to 8 Gb for Fibre Channel, 40Gb InfiniBand, and up to 10 Gb for Ethernet connections per Uplink port. All the facets of Connection Blades are available, from highly functional self-developed models to brand models from Brocade or Mellanox; all feasible requirements can thus be met.
PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
The PRIMERGY Ethernet Switch/IBP 36/8+2 is an integrated 1 Gb Connection Blade for use in the PRIMERGY BX400 and BX900 chassis. It can be installed in each Connection Blade slot (4x in BX400, 8x in BX900) and provides 36 downlink ports each with 1 Gb to the midplane to connect with the Server Blades. The module contains 8 uplink ports each with 1 Gb plus 2 uplink ports each with 10 Gb; Layer 2+ functionalities are supported.
The Intelligent Blade Panel mode combines the advantages of a switch regarding cable and port consolidation with the Pass-Thru advantage of total (VLAN) transparency without protocol compatibility problems occurring. Server Blade LAN ports may be grouped together with one or more external ports, into independent named port groups. Based on the so-called Management VLAN Grouping each Server Blade can be assigned a separate, VLAN-based management access.
This Connection Blade is prepared for the simple creation of large homogeneous I/O domains by combining (stacking) up to 8 modules within one or more PRIMERGY BX system units.