其他功能
| 支持数据传输率 |
1/2/5.5/6/9/10/11/12/18/24/36/48/54/150 Mb/s |
| 记录和监测 |
Y |
| 无线技术 |
802.11a/b/g/n |
| 发射功率 |
13 - 17.5 dBmW |
| 液晶显示器功率 |
Y |
| 遵守工业标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.11b/g/n |
| 网路功能 |
Fast Ethernet |
性能
| 频道频宽 |
40 MHz |
| 接收机灵敏度 |
1 Mbps -91 dBm @ 2.4 GHz\n2 Mbps -90 dBm @ 2.4 GHz\n5.5 Mbps -89 dBm @ 2.4 GHz\n11 Mbps -88 dBm @ 2.4 GHz\n6 Mbps -90 dBm @ 2.4 GHz\n9 Mbps -89 dBm @ 2.4 GHz\n12 Mbps -88 dBm @ 2.4 GHz\n18 Mbps -86 dBm @ 2.4 GHz\n24 Mbps -83 dBm @ 2.4 GHz\n36 Mbps -80 dBm @ 2.4 GHz\n48 Mbps -76 dBm @ 2.4 GHz\n54 Mbps -74 dBm @ 2.4 GHz\n6 Mbps -88 dBm @ 5 GHz\n9 Mbps -87 dBm @ 5 GHz\n12 Mbps -86 dBm @ 5 GHz\n18 Mbps -84 dBm @ 5 GHz\n24 Mbps -82 dBm @ 5 GHz\n36 Mbps -78 dBm @ 5 GHz\n48 Mbps -74 dBm @ 5 GHz\n54 Mbps -73 dBm @ 5 GHz |
| VLAN支持 |
Y |
| 2.4 GHz |
Y |
| 5 GHz |
Y |
| 扩频方法 |
DSSS |
| 支持服务质量（QoS） |
Y |
| 用户数量 |
250 user(s) |
| 调制 |
DSSS, OFDM |
| 网上管理 |
Y |
| 频段 |
2.4/5/5.8 GHz |
| 以太网的数据传输率 |
10, 100 Mbit/s |
端口 & 界面
| 布线技术 |
10/100Base-T(X) |
| 广域网接口 |
Ethernet (RJ-45) |
| 接口 |
RJ-45, SFP, DB-9 |
安全
| 支持虚拟专用网 |
IPSec, PPTP, DynVPN/DynDNS |
| 安全特性 |
NAT/PAT |
| MAC（媒体存储控制）地址过滤 |
Y |
协议
| 管理协议 |
MDP, SSH, HTTP, HTTPS, SNMPv1/2/3, ADP |
| 动态主机配置协议客户 |
Y |
| 动态主机配置协议服务器 |
Y |
| 支持网络协议 |
DNS, PPPoE, PPTP, GRE, L2TP, Ent-MIB, MIB-II, RTS/CTS, Telnet |
天线
| 天线增益水平（最大值） |
2 dBi |
| 天线接口类型 |
RTNC |
| 天线数量 |
3 |
| 可拆式天线（S） |
Y |
另外
| 输出电源 |
24V DC, 1A |
| 数据传输率（最大） |
300 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
2 |
WLAN Outdoor Bridgelink Bundle, 2 x WI1065n, Outdoor, Fast Ethernet, PoE, L2TP, 2.4/5GHz, 802.11a/b/g/n/h, 2 x LAN, 1 x SFP, 3 x 2dBi, ARS, WDS, TPC, ACL, NAT/PAT, QoS, 250u, IP65, White/Red + 4 x 0.5m RTNC p-N LMR400 + 4 x Surge Arrester p-N + 2 x Mast Mount + 2 x PoE Injector + 2 x ANT-N-20-5G
WLAN Outdoor Bridgelink Bundle
Bridging of radio links in unsheltered outdoor environment
The WLAN Outdoor Bridgelink Bundle (protection class IP 65) is designed for wireless bridging of radio links in unprotected outdoor areas. The bundle includes two WI1065n units (802.11n) and all the necessary components.
The WLAN Outdoor Bridge Link Bundle “Out-of-the-Box” contains all required components to setup a radio link by using the new 802.11n technology. This outdoor bundle contains two bintec WI1065n devices, which can be mounted directly at the antenna pole. The WI1065n access points are water protected and allows operation in temperature ranges between -25° C and +65° C. The bundle contains also two PoE adapters, which enables power supply over network cable. The dual polarization antennas are transmitting the data over two streams, what leads to higher performance of the system.
The WLAN Outdoor Bridgelink Bundle is intended to build radio links up to 8 km distance.
Hints to improve the operating distance:
- Use a antenna with higher gain;
- Select 20 MHz bandwidth instead 40 MHz;
- or use only one stream.
Hints for installation:
- The link must be free from any obstacles (free line of sight). If necessary a different location must be used or the antenna height must be increased.
- The antenna connectors of the Access Point ANT1 and ANT2 are connected to the antenna. It makes no difference which antenna socket is used. The antenna connector ANT3 of the AP are not used for these application.
- The antenna or rather the antenna pole must be connected with 16 mm2 CU or more to the potential equalisation. The Surge Arrestor protect the AP and must connected to the grounding of the building with 1,5 mm2 CU or more. The Surge Arrestor must be inserted in both antenna cables. In some cases it is advisable to consult a specialist for lighting protection.
