联网
支持ISDN连接 |
Y |
管理协议 |
SNMP |
IP电话协议 |
SIP |
安全
认证方法 |
RADIUS, TACACS+ |
支持虚拟专用网 |
Y |
虚拟专用网信道数量 |
10 |
防火墙 |
Y |
其他功能
最大数据传输率 |
0.054 Gbit/s |
xDSL connection |
Y |
内置存储器 |
32 MB |
闪存 |
8 MB |
扩展插槽 |
VoIP DSP. |
带宽 |
2.4 GHz |
网路功能 |
Ethernet, Fast Ethernet |
输入电压 |
24 V |
协议
动态主机配置协议客户 |
Y |
动态主机配置协议服务器 |
Y |
支持网络协议 |
PPP, PPPoE |
R1200wu DSL-Router ISDN-Backup
The bintec 1200wu is a fully equipped, versatile and flexible multi-protocol router with automatic ISDN backup and UMTS/HSDPA option. It was specially developed for high-speed Internet access and can also be used for remote access in small to medium-sized enterprises or in remote offices. Standard features include a 4-port switch and an Ethernet port for WAN access; this router also comes complete with 10 IPSec tunnels including hardware acceleration. Up to 100 additional IPSec tunnels can be added to the system with the purchase of the corresponding license. The second integrated ISDN BRI interface can also be activated optionally with the purchase of a license.
The basic version of R1200wu offers an SIP Application Level Gateway, enabling it to be connected directly to IP telephones in the network or registered with the VoIP provider. The R1200wu automatically controls the firewall, which makes it considerably easier to configure. It has also been conveniently equipped with a DSP slot for use as a VoIP media gateway.
As a wireless router, the bintec R1200wu supports the 802.11a/b/g/h standards with a gross transfer rate of 54 Mbps. The use of UMTS / HSDPA cards via the extension interface enable internet access with up to 7.2 Mbps for data and voice solutions - independent of the location. In addition to WEP encryption, the secure WPA or WPA2 modes for the use of preshared keys or the integration into a Radius server are available to guarantee secure data transmission via the air interface. Access is controlled on the port level via 802.1x. The multi-SSID function makes it possible for build several different user groups, each with their own guidelines. The WDS function (Wireless Distribution System) can be used to create wireless infrastructures for application scenarios in which a wired solution would be too expensive or technically impossible.
The devices can be configured using either the HTTP Configuration Wizard (recommended for inexperienced users) or via an HTML user interface.