Rode Pin-Cap Pin-Cap is a replacement low noise Omni Capsule for the PinMic microphone
Rode Pin-Back The RØDE Pin-Back is a replacement back plate with connector cable for the PinMic™ microphone. This back plate connects through clothing and fabric t
Monacor EMA-3 20-20000Hz, +48V, XLR in. XLR out
<b>48 V phantom power supply</b>\n- For electret microphones and microphone cartridges\n- XLR input (ba
Sennheiser MZH 70-1 wind noise, protection, grey
Used in conjunction with the MZW 70-1, this 'hairy' cover made from long-haired polyester fleece provides maximum protec
Sennheiser MZW 65-PRO Microphone foam, windshield, black
This velour foam windshield for the ME 65 microphone head and the MD 22, COM 190 and COM 195 is particularly effec
Sennheiser MZW 66-PRO foam windshield, for ME 66
This velour foam windshield for the ME 66 microphone head is particularly effective when used for outdoor applications
Sennheiser MZW 67-PRO microphone foam windshield, for the ME 67
This velour foam windshield for the ME 67 microphone head is particularly effective when used for outdoor a
Sennheiser MZW 71 microphone foam, windshield
This velour foam windshield is made from open-cell foam and provides exceptionally good rejection of wind and pop noise a
Sennheiser MZW 64-PRO microphone foam, windshield
This velour foam windshield for the ME 62 and ME 64 microphone heads is primarily designed for outdoor applications
Sennheiser MZE 8015 MZE 8015, 15cm
Special bar that carries the audio signal. The microphone head is attached to the front the XLR module to the end. Length 15 cm
Sennheiser MZE 8120 MZE 8120, 120 cm
Special bar that carries the audio signal. The microphone head is attached tothe front the XLR module to the end. Length 120 cm
Sennheiser MZQ 8000 Microphone clamp, black
Standard clamp, included in the delivery of the MKH 8000 microphones
Sennheiser MZQ 8001 Miniature clamp, black
Miniature clamp, ideal if the microphone is used with a remote cable; 3/8" standard thread (microphone not included)
Sennheiser MZS K6 Shock mount, 1/4"
Shock mount with integral flashmount adaptor for secure attachment of K6/K6P powering modules to video cameras. Thread: 1/4&qu
Proel PRO300BK Professional large dimension microphone stand with telescopic boom and steel counterweight for balancing. Suitable for recording studios and “live” e
Proel APM50CR Metal gooseneck with 3/8' - 5/8' male/female thread.
Proel PRO100BK Professional microphone stand with boom, tripod die-cast aluminum base and nylon clutch-style height adjustment.
Professional microphone stand with b
Proel APM50BK Metal gooseneck with 3/8' - 5/8' male/female thread.
Proel PRO200BK Professional microphone stand with telescopic boom, tripod aluminium base and nylon clutch-style height adjustment. Available in matt black (PRO200BK
Proel RSM100BK Microphone stand with boom with tripod die-cast aluminium base. Available with matt black or chrome plated finish. This established line of microphon
Proel RSM180 Microphone stand with boom, tripod nylon base. Available with matt black or chrome plated finish. This line of microphone stands has turned out to be
Shure ULX1 Wireless Bodypack Transmitter. Low-profile, highly durable. Eight hours battery life, 300 ft. range.\n\nThe ULX1 Bodypack Transmitter has a number of
Hosa Technology MMH-346 Quad Microphone Holder
Accommodates four ball-style microphones, stand sold separatel
Hercules MS202B MS202B
Stage Series Microphone Stand\n\nSpecially designed for backline, rental companies and touring musicians\n\nQuick Turn makes height adjustment
Hercules MH100B MH100B
Rubber-lined clip for a secure Grip\n\nEZ Adaptor lets you mount the Mic Clip with a flip of the lever\n\nFits all mic stands without top wash
Hercules MH101B MH101B
Durable rubber holder for a snug and flexible grip\n\nEZ Adaptor lets you mount the Mic Clip with a flip of the lever\n\nFits all mic stands w
Monacor UST-40T 120 dB, 40 kHz, ±1 kHz
Monacor GN-500 Chromium-plated, 500 mm (20"), 6 mm (⅝"), 9 mm (⅜")
- 500 mm (20").\n- Chromium-plated\n- Inside thread: 16 mm (⅝")\n- Outsi
Da-Lite Mic Mount Mic Mount, Black
Keep hand-held microphone in position with gooseneck mount
Sony SADH88B Horizontal Clip Pack for ECM-88B, ECM-88BC and ECM-88BPT. Package contains 10 clip
Infocus Thunder Mic Pods <b>Capture Every Voice in Larger Rooms</b>\nAdd these two Thunder Mic Pods to your Thunder Speakerphone to capture every voice in the fur
Monacor WS-200/SK 7 mm x 15 mm, Beige
<b>Microphone windshield, beige (SK) or black (SW) foam.</b>\n- For microphones with Ø 2-4 mm\n- Dimensions: Ø 7 mm x
Monacor WS-150/SK Microphone windshields, 4 pcs., 11 mm x 12 mm, Beige
<b>Microphone windshields, 4 pcs. beige foam.</b>\n- For microphones with Ø 4-6 mm\n
Monacor WS-150/SW Microphone windshields, 4 pcs., 11 mm x 12 mm, Black
<b>Microphone windshields, 4 pcs. black (SW) foam.</b>\n- For microphones with Ø 4-6
Sennheiser MZW2-A Windscreen, black
Windscreen black (1 piece) suitable for: MKE 2 series, EW g3 series as well as MZ 2-1 Gold
Proel APM25 Big ABS microphone holder, 27-31mm, Black
Big ABS microphone holder (Ø Min-Max: 27 - 31 mm)
Shure RK261BWS Windscreen, Foam, Black
Black foam windscreen for use with Shure MX183, MX184, MX185, WL183, WL184, and WL185
Dörr 395085 Dead kitten windscreen for CV02
Dorr Dead Kitten Windshield is designed for the CV02 Microphone. It minimises any wind noise when using the microphon
Sony ADC88 2 sets of Coloured Urethane Windscreens for ECM-88
- Designed for ECM-88 Series lavalier microphones\n- Two sets of the six colours (red, yellow, gre
Sony CUC31 Condenser, 60Hz-20KHz
Designed for vocal applications including live music performance, the CU-C31 is a condenser cardioid mic capsule designed for u
Sony CUF31 Dynamic Super-cardioid Mic Capsule for use with DWM-02 and DWZ series
Designed for vocal applications including live music performance, the CU-F31 is
Sony CUF32 Dynamic Wide-Cardioid Mic Capsule for use with DWM-02 and DWZ
Designed for presentation applications, the CU-F32 is a dynamic wide-cardiod mic capsul
Sony ADR88B 12 x Urethane Windscreen for ECM-88
- Designed for ECM-88 Series lavalier microphones\n- Black colour\n- 12 pieces are included
Sony ADR77B Pack of six black, metal wind shields for the ECM-77 microphone
- Designed for ECM-77 Series lavalier microphones\n- Black colour\n- Six pieces are i
Sony CAC12 Adjustable camera microphone holder
<b>Provides two-axis adjustment of microphone arm</b>\nAllows microphone direction to be adjusted. Fo
Sony ADC77 Wind Screen Kit, For ECM-77, 12 pieces, Urethane, 6 colors
Urethane colored wind screen kit for ECM-77. 6 colors, 12 pieces in each package (6 colors
König & Meyer 76-211/40 König & Meyer 76-211/40. Weight: 600
König & Meyer 76-210/9S König & Meyer 76-210/9S. Height: 1600 mm, Weight: 3 k
König & Meyer 76-210/2S König & Meyer 76-210/2S. Height: 1600 mm, Weight: 3.5 k
König & Meyer 76-260 König & Meyer 76-260. Width: 850 mm, Height: 1570 mm, Depth: 850 m
