端口 & 界面
RJ-45输入端口 |
1 |
Number of HDMI outputs |
1 |
DC-IN插口 |
Y |
技术细节
可支持的电缆类型 |
Cat5e |
最大传输距离 |
100 m |
类型 |
AV receiver |
GTB-HD-DCR, 1080p Full HD, 1920 x 1200 (WUXGA), 1 x HDMI, RS-232
Gefen ToolBox Daisy Chain HD System Receiver
Using Video Over IP techniques allows the Daisy Chain HD system to connect up to 100 displays using CAT5 cables in a daisy chain mode going from one display to the next. The system utilizes three modules: The Sender, which connects to the HD source, the Splitter module, which connects to the Sender unit using a CAT5 cable and the Receiver, which connects to the display. The Splitter unit also has an HDMI output connector. The Sender, Receiver, and Splitter simplify extension of HDMI and control signals to create an elaborate network of displays with the ability to route IR-control back from each display location to the source. RS-232 commands can also be distributed over this daisy-chained network to execute commands such as turning all displays on or off. Each CAT-5e cable between the source, splitter, and receiver units can be up to 330 (100 meters). Up to 100 Hi-Def displays at resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) are supported. A low-latency of less than a frame assures that all displays reproduce audio and video in perfect sync. This easy-to-install and easy-to-expand system is a great fit for Digital Signage applications and also for commercial, entertainment solutions (such as in bars, restaurants, and stores) that play back the same content using multiple screens.
- Extend, split and daisy-chain HDMI, IR and RS-232 using CAT-5e cables
- Each CAT-5e (or better) cable run up to 330 feet (100 meters)
- Supported HDMI Features: Resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA), 12-bit Deep Color, x.v. Color , LPCM 7.1 Audio, Dolby TrueHD, Dolby Digital® Plus, and DTS-HD® Master Audio, 3DTV pass-through, Lip Sync pass-through
- Guaranteed latency of less than one frame (16.7 to 20ms) assures synchronized A/V output from all displays
- EDID learning provides for rapid integration of source and displays
- Supports up to 100 Hi-Def displays
- Field-upgradable firmware
- Locking power supply connectors
- Wall or under-shelf mountable