安全
报警功能 |
Y |
传感器类型 |
Passive infrared (PIR) sensor |
类型 |
Wired |
检波距离 |
2 m |
开放空间最大射程 |
20 |
KNX Presence Detector - Standard
Presence detector for presence monitoring (operating mode: presence detector), for motion detection (operating mode: ceiling observer) or for monitoring with alarm telegrams (operating mode: alarm device) indoors.
- Flush-mounted device with integrated KNX bus coupler.
- Programming LED/button is visible and can be operated when installed if the ornamental ring is removed.
- PIR sensors: three sensors (crossed light paths), integrated brightness sensor.
- Adjuster for manual correction of sensitivity.
- Sensitivity is configurable.
- Sensitivity adjuster on the device can be deactivated using the software.
- Indication of motion detection (permanent or only during walking test).
- One function block configurable.
- Adjustable operating mode: ceiling observer, presence detector, alarm device.
- Individual device, main unit, auxiliary unit can be set.
- Operating mode for individual device or main unit: automatic, semi-automatic (manual ON / automatic OFF, or automatic ON / manual OFF).
- Two outputs (for function: ceiling observer, presence detector).
- Output (for function: ceiling observer, presence detector): switching, staircase function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
- Twilight stage can be set using external communication object or teach-in.
- Additional transmission delay via external communication object.
- Adaptive delay time (self-teaching additional transmission delay)
- Short-term presence function.
- Feedback of twilight stage.
- Block function.
- Manual actuation using touch sensor (separate communication object).
- Switch-off brightness (for presence detectors) via teach-in.
- Measurement of time period after last motion.