Highpoint RocketRAID 2640X4SGL PCI Express x4 2.0

RocketRAID 2640X4SGL - PCI-E x4, Marvell 88SE6445, 4 SAS/SATA, RAID 0,1,5,10,JBOD, Low Profile <b>Maintenance and Management Settings</b>
- RAID Array Roaming
- Unplug/Remove RAID array
- Hot key (ctrl-h) boot-up RAID manager via BIOS
- Firmware update while running the Operating System
- Verify RAID Array for Bad Sectors and Parity Check
- Task Scheduler
- Automatic RAID rebuild
- Automatic drive (insert / removal) detection
- Hot Spare Disk
- Staggered Drive Spinup
- Rebuild Priority (Low - Highest)
- Spin Down Idle Mode
- Hot Swap and Hot plug
- Bad sector repair and remapping to reduce dropped drives
- Multiple RAID array
- Multiple Logical Drive
- 64bit LBA support greater than 2TB per volume

<b>RAID Monitoring Tools</b>
- SMTP for email notification
- Alarm / Buzzer alerts for drive failure
- SES-2 enclosure management (Failed, SMART (SHI))
- Enclosure management support I2C
- Hard Drive LED indicators (Activity and Failed)
- SHI (Storage Health Inspector – Drive analysis from S.M.A.R.T)
- Event Log

<b>RAID Management Suite</b>
- Command Line Interface (CLI)
- Web browser-base RAID management software
- API