其他功能
MAC 地址表 |
1024 entries |
光纤类型 |
9/125 µm |
功率预算 |
29 dB |
全双工传输 |
Y |
接口 |
RJ-45, SC (2.5mm) |
遵守工业标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
运行温度范围(T - T) |
32 - 122 °F |
联网
布线技术 |
10/100Base-T(X), 100Base-FX |
性能
最大传输距离 |
40000 m |
波长 |
1310 nm |
另外
数据传输率(最大) |
100 Mbit/s |
连接方式 |
Wired |
AccessConverter, TX/3 + SSFX-SM1310/PLUS-SC, 1310xmt/1550rcv, 10/100Mb/s, 40km
AccessConverter
AccessConverter is a multi-port fiber media converter, aggregating three 10/100 Ethernet devices into a 100Base-FX uplink. While typical Media Converters perform a conversion between one twisted pair interface and one fiber optic interface, the AccessConverter offers three 10/100 ports that will connect to any 10 Mbps or 100 Mbps device. Having three ports instead of one will dramatically increase the application flexibility and reduce cost by up to 60%.
AccessConverter is an ideal solution for the LAN workgroup and Fiber-to-the-Premises applications, connecting and aggregating multiple devices, such as PCs, servers, printers and VoIP phones into a fiber optic cabling infrastructure. Providing plug-and-play operation, AccessConverter features 10/100 Auto Negotiation and AutoCross on the twisted pair ports.
The fixed-speed, 100Base-FX uplink port supports ST and SC connectors and is available with multi-mode, single-mode and single-strand single-mode fiber types, providing fiber connectivity from 2 km all the way up to 80 km distances. The unit also includes a country-specific, external AC power adaptor.
Features:
- Auto Negotiation of speed and duplex (HDX/FDX) on copper ports;
- Layer 2 packet switching, store and forward operation;
- Forwarding rate: 14,880pps for 10 Mbps; 148,800pps for 100 Mbps;
- 1024 MAC address learning;
- MTU - Supports over-sized packets up to 1,536 bytes;
- Full wire speed on all ports;
- Broadcast storm protection;
- AutoCross for MDI-II/MDI-X;
- LinkLoss and FiberAlert;
- Diagnostic LEDs.