数据传输
MAC 地址表 |
8000 entries |
交换容量 |
10 Gbit/s |
巨型帧 (Jumbo frames) |
9.6 |
吞吐量 |
14.88 Mpps |
联网
自动 MDI / MDI - X 检测功能 |
Y |
10G支持 |
N |
以太网电源(PoE)
以太网(PoE)电压范围 |
12 - 48 V |
以太网供电(PoE+)端口数量 |
2 |
支持以太网(PoE) |
Y |
端口 & 界面
基本交换 RJ-45 以太网端口数量 |
8 |
以太网铜缆技术 |
100BASE-FX, 10BASE-T, 100BASE-TX, 1000BASE-T |
基本交换 RJ-45 以太网端口类型 |
Gigabit Ethernet (10/100/1000) |
8xRJ-45, Auto MDI/MDI-X, 12-48V PoE, 7.78W, IP30, Metal, 30x95x140mm, 100/1000/1000Base-T, 14.88Mpps, 10Gbps, 136Kbits Buffer, 8K Mac, 9.6 Jumbo Frames, Blue
8 Port Gigabit Industrial Ethernet Switch
The EIR408-T is an 8 Port Unmanaged Industrial Gigabit Ethernet Switch. Packed full of rugged features, this switch is perfect for your high speed industrial network.
High-Speed Transmissions:
The EIR408-T includes a switch controller that automatically senses transmission speed (10/100/1000 Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol.
Dual Power Input:
To reduce the risk of power failure, the EIR408-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open.
Flexible Mounting:
The switch features a space saving IP30 metal enclosure that can be DIN or Panel mounted.
Wide Operating Temperature:
With an operating temperature of -40 to 75°C (-40 to 167°F), this switch can be used in harsh industrial environments.
Easy Troubleshooting:
There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power (P1, P2 and Fault) show power status. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable.