性能
| 最大传输距离 |
5000 m |
| 光纤模式结构 |
Multi-mode |
| 发射功率（最大） |
-14 dBmW |
| 接收功率（最小） |
-32 dBmW |
| 链路预算 |
12 dB |
| 可支持的光纤电缆直径 |
50/125, 62.5/125 µm |
| 发射功率（最小） |
-20 dBmW |
| 波长 |
1300 nm |
其他功能
| 传输距离（最大） |
5 km |
| 运行温度范围（T - T） |
-49 - 185 °F |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 双机热备系统 |
Half, Full |
| 以太网的数据传输率 |
10, 100 Mbit/s |
另外
| 连接方式 |
Wired |
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
IE-MiniFiberLinX-II, TP-TX/FX-MM1300-SC, 10/100 Mbps, 5km, w/ Telco Power & Last Gasp
<b>IE-MiniFiberLinX-II Optical Ethernet Demarcation Unit</b>
Transparent LAN service providers require remote CPE management capabilities as well as the ability to isolate management traffic and customer data. Designed for service providers and campus network administrators, the compact IE-MiniFiberLinX-II provisions point-to-point fiber optic connections and provides a unique management tool to monitor the entire link between two locations. Support for IEEE 802.3ah passive OAM (Operations, Administration and Maintenance) aids in detecting network problems and offers simple network maintenance. IE-MiniFiberLinX-II CPE for fiber optic networks allows service providers to deliver "triple play" voice, video and data services to customer premises.
The CPE and the fiber link can be managed as a single entity. The CPE allows for remote configuration and provides vital alerts to network administrators. As a copper-to-fiber media converter, it also allows lower cost copper switches to connect to the fiber connection. Offering unparalleled flexibility, the IE-MiniFiberLinX-II supports multiple fiber types including multi-mode and single-mode as well as single-strand fiber, doubling the capacity of installed fiber. Optional Course Wavelength Division Multiplexing (CWDM) functionality also increases the capacity of existing fiber.
The IE-MiniFiberLinx comes equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter).
The IE-MiniFiberLinX-II also offers multiple powering options. Use the included AC power adapter or use a 4-terminal DC power block, which has an extended voltage range of 5 to 50VDC. The IE-MiniFiberLinX-II also complies with the IEEE 802.3af Power over Ethernet standard, acting as a Powered Device (PD) to draw power when connected to 802.3af-compliant Power Sourcing Equipment (PSE).
Combining copper-to-fiber conversion, extended temperature performance, plug-and-play operation, miniature size and multiple power options, the IE-MiniFiberLinX-II is one of the most versatile fiber optic CPE devices available on the market today.
<b>Features:</b>
- Preserves complete end-to-end fiber connection integrity;
- Includes bi-directional bandwidth control;
- Supports 802.3ah Passive OAM (Operations, Administration and Maintenance);
- Read/write IEEE 802.1Q VLAN-tags;
- Extra Tagging (Q-in-Q) also supported;
- QoS- IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority);
- Layer 2 packet switching, store and forward operation;
- Forwarding rate: 14,880pps for 10 Mbps; 148,800pps for 100 Mbps;
- AutoCross for MDI/MDIX;
- Features Auto Negotiation and Selective Advertising;
- Supports Half- (10/100 only) and Full-Duplex operation;
- MTU: Supports over-sized packets up to 1,916 bytes.
