联网
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
双机热备系统 |
Full |
能量控制
输入电压 |
100-240 V |
输入电流 |
2 A |
接受频率 |
50/60 Hz |
外接电源转接器 |
Y |
性能
光纤模式结构 |
Single-mode, Multi-mode |
可支持的光纤电缆直径 |
9/125, 50/125, 62.5/125 µm |
另外
以太网路(RJ-45)连接接口数量 |
2 |
连接方式 |
Wired |
数据传输率(最大) |
1000 Mbit/s |
PoE Giga-MiniMc & PoE+ Giga-MiniMc - 10/100/1000 Mbps PoE & PoE+ Switching Media Converter
<b>The PoE and PoE+ Giga-MiniMc are targeted for Gigabit and 100 Mbps applications that require power over Ethernet to locations where PoE is needed to power the unit.</b>
The PoE and PoE+ Giga-MiniMc are low-cost, compact, multi-port media converters that support both PoE and PoE+ standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever expanding versatility of the MiniMc product line.
Featuring 2 10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE and PoE+ Giga-MiniMc are Power Source Equipment (PSE) devices. The PoE+ GigaMiniMc is capable of powering up to two Powered Devices (PD) over standard CAT5 cable or better, whereas the PoE GigaMiniMc can power one PD device via a copper port while delivering data over the other copper port. The PoE+ GigaMiniMc is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more power than the typical 15.4 W provided by standard PSE devices such as the PoE GigaMiniMc.
The PoE and PoE+ Giga-MiniMc models are fully compatible with the IEEE 802.3af/at standards to ensure a seamless integration into your network. Enhanced features include store-and-forward, Autocross and PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.