性能
| 最大传输距离 |
40000 m |
| 波长 |
1310 nm |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
2 |
iMcV-FiberLinX 56-14515 - 10/100Mbps, 40km, ST
iMcV-FiberLinX
SNMP-Manageable Optical Ethernet Demarcation Unit
Using the VLAN Functionality on iMcV-FiberLinX
Service providers routinely use IEEE 802.1Q Virtual Local Area Network (VLAN) tagging to secure, separate and differentiate customer traffic. iMcV-FiberLinX enables service providers to support multiple VLAN-based applications.
- IEEE 802.1Q VLAN compatible.
- Valid VLAN IDs are 1 to 4,094.
- Port-based VLAN tagging.
- Transparency Mode passes all data and allows a mixture of VLAN Tagged and Untagged traffic.
- Configure to support VLAN trunking; iMcV-FiberLinX can trunk up to 10 VLAN IDs for data, plus an additional for
- SNMP (Transparency Mode disabled).
- IEEE 802.1p provides a 2-tier queue for differential prioritization of inbound and outbound traffic especially beneficial
- for traffic requiring high priority (e.g. VoIP; this traffic is serviced first).
Application Example 1
When used in pairs, a iMcV-FiberLinX configured as a Host resides at the head-end while another iMcV-FiberLinX installs at the remote customer location, typically on the network edge where the customer network meets the service provider infrastructure. Via SNMP the iMcV-FiberLinX solution monitors, the entire link and ensures data integrity while remaining isolated and completely transparent to the customer LAN.
Application Example 2
A single iMcV-FiberLinX can be used as a single-solution (CPE) application. Install the sole iMcV-FiberLinX at the customer’s network edge and configure the device as a standalone. Connect the iMcV-FiberLinX to a media converter at the central office or directly to a fiber switch. Manage the FiberLinX from the central office.
