其他功能
数据包包传输速度 |
1916 |
光纤类型 |
9/125 µm |
全双工传输 |
Y |
接口 |
RJ-45, SC (2.5mm) |
遵守工业标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
运行温度范围(T - T) |
32 - 122 °F |
联网
布线技术 |
10/100Base-T(X), 100Base-FX |
性能
最大传输距离 |
40000 m |
波长 |
1310 nm |
另外
数据传输率(最大) |
100 Mbit/s |
连接方式 |
Wired |
iMcV-MediaLinX, TX/SSFX-SM1310/PLUS-SC, 1550rcv, 40km
The MediaLinX series offers the most flexible Ethernet switching media converters in the industry
Dissimilar media types, protocols and duplex settings can make LAN internet working and Fiber-to-the-Subscriber projects challenging undertakings. For example, if the service provider’s network infrastructure is 100 Mbps or Gigabit fiber, but the customer wants to receive a standard 10 Mbps Ethernet interface to their LAN; making the connection between the two network segments can be difficult. The complexity of today's mixed media networks and the increasing demand for bandwidth requires access equipment that is both flexible in connecting different media types and scalable between different speeds.
Convert speed, media and duplex mode:
The iMcV-MediaLinX series of switching media converters offers service providers and enterprise networks unparalleled flexibility in connecting copper-based networks to Fast Ethernet or Gigabit fiber optic infrastructures. The SNMP-manageable iMcV-MediaLinX converters allow device managers to use Auto Negotiation functionality on the twisted pair port for plug-andplay operation, or to manually configure the port for the desired speed and duplex mode. What's more, you can even set the fiber port for Half- or Full-Duplex operation (10/100 Mbps only).
The iMcV-MediaLinX series also includes troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier should they occur. In addition, hot-swappable iMcV-MediaLinX modules significantly reduce operating costs by allowing other modules within the same chassis to remain up and running during product upgrades, maintenance and troubleshooting.
Features:
Same unit converts speed, media and duplex mode!
- Available in 10/100 Mbps and 10/100/1000 Mbps models;
- IE-iMcV-MediaLinX supports SFP (LC)transceivers and extended operating temperatures;
- Configure twisted pair port for Auto Negotiation or force the speed;
- Twisted pair and fiber ports can be individually configured for Half- or Full-Duplex operation.
Easy to configure and manage with GUI-based iView2
- Up and running in less than 5 minutes;
- Easily adjust settings when user requirements change;
- Easy upgrades; no user intervention or visits to remote locations required;
- Monitor and control all connections.
Meets a variety of installation requirements
- Available for multi-mode, single-mode and CWDM fiber;
- Available with single-strand fiber.
Eases Troubleshooting
- LinkLoss, FiberAlert, SNMP management and LEDs assist in diagnosing problems on fiber optic networks;
- Features Link Fault Pass-Through (LFPT), a troubleshooting feature that monitors the copper and fiber ports of the unit; if a port loses LINK, the unit disables the transmitting signal on the other port (Pass-Through) and notifies the user via LED.