能量控制
输入电流 |
0.7 - 1.6 A |
接受频率 |
50/60 Hz |
外接电源转接器 |
N |
输入电压 |
100-240 V |
性能
波长 |
1310 nm |
接收功率(最小) |
-21 dBmW |
链路预算 |
12 dB |
可支持的光纤电缆直径 |
9/125 µm |
发射功率(最小) |
-9 dBmW |
最大传输距离 |
15000 m |
光纤模式结构 |
Single-mode |
发射功率(最大) |
-3 dBmW |
联网
自动 MDI / MDI - X 检测功能 |
Y |
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
另外
以太网路(RJ-45)连接接口数量 |
2 |
连接方式 |
Wired |
数据传输率(最大) |
1250 Mbit/s |
PoE Giga-McBasic, 2TX/SSLX-SM1310-SC (1550 rcv), 15 km
<b>Supporting the IEEE 802.3af and 802.3at standards, the multi-port PoE and PoE+ Giga-McBasic media converters offer unparalleled installation flexibility and cost-savings.</b>
The PoE and PoE+ Giga-McBasic are the perfect solutions for network applications that require Power over Ethernet for locations inside buildings where PoE is required to power an Ethernet device. Their small, table-top design and durability make them perfect for installation anywhere space is limited. Additionally, both units are manufactured with an internal AC power supply. This feature significantly increases reliability over products that use awkward, external AC/DC power transformers.
The PoE Giga-McBasic unit comes with one SFP or fixed fiber transceiver, one PoE/PSE 10/100/1000Base-T copper port that provides 15.4 Watts of power with data, and one 10/100/1000 Mbps copper port to connect a non-PoE unit to the same fiber uplink.
The PoE+ Giga-McBasic unit comes with one SFP or fixed fiber transceiver and two PoE/PSE 10/100/1000Base-T copper. Each port provides 25.5 Watts of power with data.
As a fiber-fed media converter, it provides both power and data to a remote device over standard CAT5, eliminating the need for additional power to the remote device. The copper ports Auto Negotiate to the connected device’s speed and duplex mode: 10 Mbps, 100 Mbps or 1000 Mbps, and HDX or FDX (including Flow Control). Additionally, both models support jumbo frames up to 10240 bytes.