性能
| 可支持的光纤电缆直径 |
9/125 µm |
| 最大传输距离 |
10000 m |
| 光纤模式结构 |
Single-mode |
| 波长 |
1310 nm |
端口 & 界面
| 以太网供电（PoE+）端口数量 |
2 |
| DC-IN插口 |
Y |
能量控制
| 以太网（PoE）供电总功率概算 |
25.5 W |
| 输入电压 |
100-240 V |
| 输入电流 |
2.0 A |
| 接受频率 |
50/60 Hz |
| 支持以太网（PoE） |
Y |
| 外接电源转接器 |
Y |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 以太网的数据传输率 |
10, 100, 1000 Mbit/s |
另外
| 数据传输率（最大） |
1000 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
2 |
| 连接方式 |
Wired |
PoE+ Giga-MiniMc LFPT, 2TX/SSBX-SM1310-SC (1490 rcv)
<b>The PoE and PoE+ Giga-MiniMc LFPT is targeted for Gigabit and 100 Mbps applications that require power over Ethernet to locations where PoE is needed to power the unit.</b>
The PoE and PoE+Giga-MiniMc LFPT are low-cost, compact, multi-port media converters that support both PoE and PoE+ standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever-expanding versatility of the MiniMc product line.
Featuring 2 10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE and PoE+ Giga-MiniMc LFPT are Power Source Equipment (PSE) devices. The PoE+ GigaMiniMc LFPT is capable of powering up to two Powered Devices (PD) over standard CAT5
cable or better, whereas the PoE GigaMiniMc LFPT can power one PD device via a copper port while delivering data over the other copper port. The PoE+ GigaMiniMc is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more
power than the typical 15.4 W provided by standard PSE devices such as the PoE GigaMiniMc LFPT.
The PoE and PoE+ Giga-MiniMc LFPT models are fully compatible with the IEEE 802.3af/at standards to ensure a seamless intergation into your network. Enhanced features include store-and-forward, Autocross and PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.
