联网
双机热备系统 |
Full, Half |
自动 MDI / MDI - X 检测功能 |
Y |
以太网的数据传输率 |
10, 100 Mbit/s |
以太网接口类型 |
Fast Ethernet |
网络标准 |
IEEE 802.3, IEEE 802.3af, IEEE 802.3u |
转换器输入接口 |
100Base-TX |
性能
发射功率(最小) |
-5 dBmW |
可支持的光纤电缆直径 |
9/125 µm |
链路预算 |
31 dB |
接收功率(最小) |
-36 dBmW |
光纤模式结构 |
Single-mode |
最大传输距离 |
80000 m |
波长 |
1550 nm |
能量控制
输入电压 |
100-240 V |
功耗(一般操作) |
10 W |
外接电源转接器 |
N |
接受频率 |
50/60 Hz |
输入电流 |
0.5 A |
环境条件
运行湿度范围(H-H) |
5 - 95% |
储存温度范围 (T-T) |
-40 - 85 °C |
其他功能
尺寸(宽 x 深 x 高) |
120.9 x 185.9 x 3.71 mm |
认证标准
认证 |
FCC A, UL/cUL, CSA, CE |
另外
数据传输率(最大) |
100 Mbit/s |
连接方式 |
Wired |
以太网路(RJ-45)连接接口数量 |
2 |
运行温度范围(T - T) |
0 - 50 °C |
PoE McBasic, 2TX/FX-SM1550/LONG-SC, 80 km
The PoE McBasic is the perfect solution for network applications that require Power over Ethernet for locations inside buildings where PoE is required to power an Ethernet device. The PoE McBasic offers three ports - a 100 Mbps fiber uplink for the network connection, one PoE/PSE 10/100Base-T copper port that provides Power over Ethernet, and one 10/100 Mbps copper port to connect a non-PoE unit to the same fiber uplink.
As a fiber-fed media converter, it provides both power (up to 15.4 Watts) and data to a single remote device over standard CAT5, eliminating the need for additional power to the device. The copper ports Auto Negotiate to the connected device’s speed and duplex mode: 10 Mbps or 100 Mbps, and HDX or FDX (including Flow Control). Additionally, the PoE McBasic supports jumbo frames up to 10240 bytes.
The PoE McBasic’s small, table-top design and durability makes it ideal for installation anywhere space is limited. Additionally, the PoE McBasic comes with an internal AC power supply. This feature significantly increases reliability over products that use awkward, external AC/DC power transformers.