其他功能
| 认证方法 |
X.509v3 |
| 接口 |
PCI |
| 遵守工业标准 |
IEEE 802.3, IEEE 802.3u |
| 网路功能 |
Fast Ethernet |
联网
| 端口转发 |
Y |
| 虚拟专用网信道数量 |
10 |
| 动态主机配置协议客户 |
Y |
| 动态主机配置协议服务器 |
Y |
数据传输
| 虚拟专用网通过 |
70 Mbit/s |
| 防火墙通过 |
99 Mbit/s |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
mGuard PCI/266 with VPN-10
mGuard pci
The first all-in-one security solution in PCI standard.
The mGuard pci is currently the only PCI-compliant security device that unites all required security functions in a single component. It can be integrated quickly and easily, without modifications to the system settings or driver installation – regardless of the processor technology and operating system used.
The comprehensive mGuard security concept
With the mGuard pci, Innominate offers the world's first all-in-one security solution in PCI standard which is also suited for use in production environments. In addition to the integrated Stateful Inspection Firewall high-performance VPN functionality can be supplemented.
Regardless of the computer platforms you use, regardless which operating systems you work with - if your systems support PCI, they can guarantee the highest integrated security standards with this unique "device attached security" solution. In every office environment, in every industry environment; and also in your company.
Quickly installed, reliably protected
The mGuard solution unites the advantages of hardware and software-based security concepts in a single component. All the security functions are integrated into the independent mGuard platform. It is not necessary to reconfigure the computer system being protected, nor do drivers or additional software need to be installed. Thanks to the Innominate Stealth Mode, the mGuard pci is also integrated completely transparently into the system. The PCI bus is only used for the power supply.
In addition, you can install the mGuard pci in lieu of a network card, for use as a high-performance security router with interface functions.
At a glance
- High data throughput for VPN and firewall.
- Virtual addressing (1:1 NAT) in the VPN tunnel avoids address conflicts.
- Simple integration without configuration modifications and without installation of drivers or additional software.
- User firewall regulates access to internal or external resources via user login to the mGuard and central RADIUS server.
- Transparent Innominate Stealth Mode.
- Configuration with the Innominate Device Manager (IDM).
- Via the "Simple Network Management Protocol", status changes and alarm messages are communicated to a central SNMP system.
