MoRoS ISDN 1.1.1 - Modem + Router + Switch
Remote acces to Ethernet devices The MoRoS combines a modem, a router and a 4-port switch. The dialin and dial-out functionality enables the remote maintenance and operation of devices in an Ethernet network.
The MoRoS device is available with an integrated analogue modem, ISDN-TA or with GSM/GPRS modem. The integrated 4-port switch allows a direct connection for up to four network devices.
The configuration of the MoRoS device is easy and fast via a web interface. The MoRoS can make a direct also a internet connection.
Typical application:
- Access to a network with SPS, HMI and datalogger
- Modem-replacement for devices with an Ethernet interface
MoRoS – Modem Router Switch
- Dial-In and dial-out router
- Integratet communication module analogue modem, ISDN-TAG or GSM/GPRS)
- 4-port switch with 10/100 MBit/s
Modem:
- Analogue Modem - switched line up to 56 kBits/s, international applicable
- ISDN - EURO-ISDN up to 64 kBits/s
- Configuration GSM/CSD up to 14.4 kbps, GPRS Class 12 up to 85 kbps; Quadband (850, 900, 1.800, 1.900 MHz)
Router:
- Function: dial-in, dial-out, callback; DHCP server and client, Full NAT (port forwarding), DNS Relay, dynDNS-Support, VPN (OpenVPN Client and Server), Firewall
- Authentication: 10 users for dial-in, authentication via PAP, CHAP, MS-CHAP, MS-CHAP 2
- Dialing filter(dial-out): on the basis of IP addresses and ports
Switch:
- Ports: 4 x RJ45
- Operating mode: 10/100 MBit/s for full and half duplex operation
- Function: automatically recognizes patch/cross over cables; automatic speed
adjustment; MDI/MDI-X, port mirroring
