设计
| 外壳材料 |
Metal |
| 液晶显示器指示灯 |
Y |
| 內置式 |
N |
联网
| 双机热备系统 |
Full |
| 以太网的数据传输率 |
10, 100 Mbit/s |
| 以太网接口类型 |
Fast Ethernet |
| 以太网光缆技术 |
100BASE-FX |
| 网络标准 |
IEEE 802.3, IEEE 802.3u |
| 以太网铜缆技术 |
10BASE-T, 100BASE-TX |
| 可支持的电缆类型 |
Cat5e |
| 转换器输入接口 |
10Base-T, 100Base-TX |
| 转换器输出接口 |
100Base-FX |
性能
| 发射功率（最小） |
-15 dBmW |
| 灵敏度 |
-32 dBmW |
| 可支持的光纤电缆直径 |
9/125 µm |
| 波分复用（WDM） |
Y |
| 平均故障间隔时间 |
100000 h |
| 光纤模式结构 |
Single-mode |
| 最大传输距离 |
20000 m |
| 发射功率（最大） |
-3 dBmW |
环境条件
| 运行湿度范围(H-H) |
10 - 80% |
| 储存温度范围 (T-T) |
-20 - 70 °C |
重量和尺寸
| 深度 |
105 mm |
| 宽度 |
69 mm |
| 重量 |
180 g |
| 高度 |
25 mm |
能量控制
| 外接电源转接器 |
Y |
| 功耗（最大） |
2.5 W |
| 输出电流 |
1.2 A |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 连接方式 |
Wired |
| 包括 AC 适配器 |
Y |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 运行温度范围（T - T） |
0 - 50 °C |
10/100Base-TX to 100Base-FX, SC, Single-Mode, 20 km (12.4 mi.), WDM (RX1310/TX1550)
The Intellinet Fast Ethernet WDM (bi-directional wavelength division multiplexing) Media Converter utilizes a single strand of fiber to transmit network traffic on separate receive and transmit wavelengths (1310/1550 nm). This innovative technology allows you to effectively use the two strands for two independent connections or to double the capacity without digging in a second fiber cable. The converter is completely transparent to the network so the network performs exactly the way it did before — only now it can support both copper and fiber mediums.
Expands the Size of an Existing Network
This converter provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. It also provides building-to-building connectivity without the cost and disruption associated with the installation of additional routers.
Enhances the Distance between Networking Devices
Connecting the converter to fiber segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fiber-based node or networking device.
Cabling Flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wallmount installation. Several converters can be simultaneously installed into a 19" rack-mountable chassis.
