Moog Videolarm CDAH13 Outdoor Environmental Housing
The environmental CDAH13 is an outdoor housing that can accommodate camera/ lens combinations up to 10.5" long and
Moog Videolarm AP16CH2 Pressurized Outdoor Housing, White
The AP16 aluminum outdoor tubular housing offers outstanding protection for your camera. The AP16 is pressurized t
Intellinet 176248 Pole Mount
- Designed for outdoor camera enclosure models 176231, 176224 and 176323;\n- For pole diameters up to 110 mm (4.3 in.) wide;\n- Made of st
Intellinet 171144 Indoor Enclosure, Silver/Grey
- Protects Network IP Cameras 550710 and 550703 for indoor use;\n- Mounting bracket included;\n- Material: Aluminum;\n-
Intellinet 170765 Wall Mount Bracket, Beige
- Bracket made out of aluminum, beige;\n- Swivel angle: 360°;\n- Tilt angle: 90°;\n- Maximum load: 10 kg (22 lbs);\n- Dimen
Intellinet 170758 Outdoor Enclosure, Beige/Silver-grey
- Weatherproof enclosure protects Network IP Cameras 550710 and 550703 for outdoor use;\n- Mounting bracket incl
Wisecomm MBK010 Aluminum Mounting Bracke
- Mounting Bracket for HS13 & HS13HB\n- Aluminum\n- Swivel Angle 360 Degree\n- Tilt 90 Degree\n- 85(W) X 100(H) X 285(L)
Canon A-RCP7C Replacement capsule, 17.78 cm (7 ") , Clear
Replacement capsule, 7" Clear
Canon A-RCP7T Replacement capsule, 17.78 cm (7 ") , Tinted
Replacement capsule, 7", Tinte
EverFocus BA-EHD Aluminum “L” style Mounting Bracket
- Aluminum “L” style mounting bracket for EHD series vandal domes*.\n- 169 x 146 x 110 mm / 6.7” x 5.7” x 4.3” (L
EverFocus EPTZ-ICM Flush Ceiling Mount
- Supports flush & recessed ceiling mount.\n- Aluminum die-cast housing.\n- Plastic decorative flange
EverFocus EPTZ-WMB Wall Mount Bracket for EPTZ3100/3100i/3600
- Die-cast aluminum wall mount bracket.\n- Support up to 33 lbs.\n- Weatherproof IP66 rated.\n- Compatible
EverFocus EPTZ-CMB PTZ Concrete Ceiling Mount Adaptor
- Ceiling mount adaptor for indoor EPTZ series PTZ cameras.\n- Aluminum die-cast housing
EverFocus EPTZ-BKA Wall & Pendent Mount Adaptor for PTZ Speed Domes
- Wall & pendent mount adaptor for EPTZ series PTZ speed domes.\n- Die-cast aluminum.\n- Ada
EverFocus EPTZ-SSM Outdoor Sunshield for EPTZ3100/3100i/3600
- Outdoor sunshield for EPTZ3100/3100i/3600.\n- Aluminum die-cast housing.\n- Weatherproof IP66 rated
EverFocus ESDA-1000 Step Down Adaptor for PTZ Speed Domes
- Step down adaptor for PTZ speed dome cameras.\n- Aluminum, powder-coated.\n- 1.5 NPT threaded.\n- 91 g/0.2 lb
Intellinet 176323 Network Camera Indoor-Outdoor Enclosure, 1.6kg, beige
<b>Protect Your Network Camera Investment</b>\n\nThe IP66 rated INTELLINET NETWORK
Manfrotto 356 356, Wall Mount Camera Support
As for the 355 but designed to be mounted to a wall. Comes complete with the Monopod Tilt Head 234
Mobotix MX-D14-VANDAL-ESMA The Mobotix MX-D14-VANDAL-ESMA Vandalism Kit for D14 Series Cameras (Matt Finish) is ideally suited for surveillance at extremely critical locations.
Sony UNIOFS7C1 Outdoor Vandal Resistant Flush Mount Enclosure, Clear dome
Outdoor vandal resistant flush mount enclosure with thermostatically controlled heater/blo
Mobotix MX-D14-VANDAL-PUWH Vandalism Kit for D14 Series Cameras (Powder Coated White Finish)
Vandalism Kit for D14 Series Cameras is ideally suited for surveillance at extremel
Mobotix MX-D14-VANDAL-PUGR Vandalism Kit for D14 Series Cameras (Grey Powder Coated)
Vandalism Kit for D14 Series Cameras is ideally suited for surveillance at extremely critic
Mobotix MX-D14-VANDAL-ESPO Vandalism Kit for D14 Series Cameras (Polished)
Vandalism Kit for D14 Series Cameras is ideally suited for surveillance at extremely critical locatio
Mobotix MX-D14-VANDAL-PUBL Vandalism Kit for D14 Series Cameras (Powder Coated Black Finish)
Vandalism Kit for D14 Series Cameras is ideally suited for surveillance at extremel
Sony UNIUMB1 Indoor wall mount bracket for SNC-DF50N, DH140, DH240, DM110, DS10, RH124, RS44N, RS46N, SSC-CD45 and CD49\n\n- Easy installation with two-piece mech
Sony UNIOSL7C2 Outdoor Vandal Resistant Surface Mount Enclosure, Clear Dome
Outdoor vandal resistant surface mount enclosure with thermostatically controlled heater
Axis 5022-211 T91A21 Stand Black
Metal stand for wall- or hard ceiling mount. Compatible with all standard tripod thread cameras.\n\n<b>Compatibility</b&g
Axis 5700-851 Bracket kit for surface mounting a camera on a hard ceiling
Hagor KA-1 Hagor KA-1. Type: Mount, Colour of product: Silve
Axis 5502-781 5502-781, f/ Axis P3346
Drop ceiling mount including clear transparent bubble. For indoor use.\n<b>Part number: 5502-781</b>
Mobotix MX-M12-DevKit-M14-BW B/W Sensor in aluminium block (M14)
<b>Sensor with M14 lens mount for DevKit models</b>\n\n- Color sensor: 2048x1536 pixels\n- Sensitivit
Mobotix MX-M12-DevKit-M14-C Color Sensor in aluminium block (M14)
<b>Sensor with M14 lens mount for DevKit models</b>\n\n- Color sensor: 2048x1536 pixels\n- Sensitiv
Cisco VC020 VC020, White
Exterior camera enclosure with mounting arm. Camera sold separately
Mace LENS-660A LENS-660A - F1.6 Varifocal Manual Iris Lens
Mace offers security camera lenses in a variety of styles and sizes that work with different CCTV surveil
Axis T97A10 - IP66-rated\n- Easy to install\n- Wall-mount\n- Indoor and outdoor\n\n<b>Protection of network video units</b>\nAXIS T97A10 Enclosure is
Axis 5700-691 Mounting Bracket
Original aluminum mounting bracket for wall- or hard ceiling installations
Axis 5800-011 Weather Shield Kit
Original aluminum weather shield. Screws included
Lorex LBC6050 Color, 60 degrees, IP66,Sony Super HAD
- Video image processor delivers 600 TV lines of resolution\n- Digital Noise Reduction ensures crystal clear n
D-Link DCS-33-1 DCS-33-1, f/ DCS-6510, White
This is a flush mounting bracket for DCS-651
Sony UNIXBB1/T UNIXBB1/T, mounting bracket, Black
Black mounting bracket for use with the SNC-CH110 and SNC-CH210 camera
EverFocus EZ-CMB EZ-CMB, "J" Style Ceiling Mount Bracket, 0.77kg
"J" Style Ceiling Mount Bracket for EZ230E, EZ235E, EZ330E, EZ335E, EZ550 & E
EverFocus EPTZ-CNM Corner Mount Adaptor
Steel corner mount adapto
D-Link DCS-33-4 DCS-33-4, f/ DCS-6510, White
This is a bent mounting bracket for DCS-651
D-Link DCS-33-2 DCS-33-2, f/ DCS-6510, White
This is a surface mounting bracket for DCS-651
Mobotix MX-D14-MODULE-D135 Mobotix MX-D14-MODULE-D135. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
Mobotix MX-D14-MODULE-N22 Mobotix MX-D14-MODULE-N22. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
Mobotix MX-D14-MODULE-N135 Mobotix MX-D14-MODULE-N135. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
Mobotix MX-D14-MODULE-D65 Mobotix MX-D14-MODULE-D65. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
Mobotix MX-D14-MODULE-D43 Mobotix MX-D14-MODULE-D43. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
Mobotix MX-D14-MODULE-D32 Mobotix MX-D14-MODULE-D32. Placement supported: Universal, Colour of product: Black. Connectivity technology: Wire
