技术细节
带宽 |
6.75 Gbit/s |
最大传输距离 |
100 m |
类型 |
AV transmitter & receiver |
可支持的电缆类型 |
Cat5e, Cat6 |
能量控制
电流 |
2 A |
工作电压 |
5 V |
外接电源转接器 |
Y |
端口 & 界面
RJ-45输入端口 |
1 |
RJ-45输出端口 |
1 |
HDMI输入 |
1 |
DC-IN插口 |
Y |
Cat 5e/6, HDMI, 100 m, 1080p, 6.75 Gbps, 170 g, Black
The KanexPro Long-Runner employs HDBaseT technology to route high-resolution HDMI signals from the source up to 330 feet (100m) to your HD display. It supports full 3D with resolutions up to 4Kx2K (4 times the 1080p), multi-channel audio and IR extension over a single low cost CAT5e/6 cable.
Fully compliant with HDCP, EDID and CEC controls, the Long-runner HDMI extender is an ideal solution for HDMI extension over long distances.
<b>Please note:</b>
Do not use couplers in to join RJ-45/CAT6 cables, this will cause signal degradation and signal loss. To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded CAT5e/CAT6 and use shielded RJ45 connectors with our extender products. "EZ end" connectors are not recommended for use with HDMI extenders.
- Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable
- Infrared Signal Input/Output, embedded over extension
- Supports resolutions from 1080p/60@48bit to 4Kx2K
- Supports data rates up to 10.2 Gbps
- Enables 3D pass-through
- Supports CEC pass-through
- HDCP and EDID compliant
- Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant
- Uncompressed audio support such as LPCM
- Front panel-LEDs for link activity and HDCP authentication
- External power supplies included
Note: Please adhere to the TIA/EIA568B standards when terminating network cables in the field.