重量和尺寸
| 接收器尺寸（宽 x 深 x 高） |
150 x 83.8 x 27.9 mm |
| 接收器的重量 |
800 g |
| 发射器重量 |
800 g |
| 发射器尺寸（宽x深x高） |
150 x 83.8 x 27.9 mm |
端口 & 界面
| RS-232 输出端口 |
1 |
| RS-232 输入端口 |
1 |
| DC-IN插口 |
Y |
| RJ-45输入端口 |
3 |
| RJ-45输出端口 |
2 |
| HDMI输入 |
1 |
技术细节
| 带宽 |
10.2 Gbit/s |
| 类型 |
AV transmitter & receiver |
| 可支持的电缆类型 |
Cat5e, Cat6 |
| 最大传输距离 |
90 m |
4K Compliant HDBaseT 100 Meter - HDMI Extender w/ Power over Ethernet
The KanexPro HDBASE100POEL is a transmitter - receiver set that enables you to route ultraHD signals up to 330 feet (100 meters) over single CAT6 cable using 5 Play HDBaseT Technology.
<b>Key Features for AV Design and Install:</b>
- Support for PoE – Power over Ethernet from either side of the extender set (Tx to Rx - Rx to Tx) saving electricians cost and one power outlet.
- Supports 4K UHD resolutions up to 60Hz.
- LAN accessibility available through 1x Ethernet port on the Sender to route Internet signals to 2x Ethernet jack on the Receiver for PC, media player or Smart TV connectivity over a single CAT6 cable using HDBaseT technology.
- Locking HDMI connectors and power supplies which protects the unit from cable jostling and signal loss.
- HDMI loop for local monitor out while extending 330’ to the receiver side. Fully compliant with the latest HDCP specifications and supports EDID management for proper resolution output up to ultra HD 4K, 1080p/60 & 3D.
The transmitter and receiver sets are built with aircraft grade aluminum enclosure which provides light weight for mounting behind flat-panel TV's or over the ceiling structures with sturdy finish.
<b>Applications:</b>
Ideally used for Digital Signage, Corporate AV, classroom technology and government applications where you can route ultra HD signals up to 330 feet (100meters) over a single STP CAT6a cable and provide power over Ethernet to the receiver side of the extender.
<b>Please note:</b>
Do not use couplers between the RJ-45/ CAT6 cables, this will cause degradation. To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded STP CAT6 or CAT5e cables and use shielded RJ45 connectors with our extender products.
<b>features</b>
- Extend HDMI/ DVI signals over single CAT5e/6 cable up to 330'
- Powered over Ethernet (PoE)
- HDMI out for local monitor support
- Supports resolutions from 1080p/60@48bit to 4K@60Hz
- Supports all 3D formats
- 2 x Ethernet switch for LAN access over HDBaseT
- Super high bandwidth up to 10.2 Gbps
- HDCP compliant with EDID pass-through
- Supports 24bit/36 bit deep color
- Bi-directional RS -232 protocol transmitted over cat6
- Bi-directional IR control transmitter over cat6
- Built-in LED indicators for signal/ work status
- Table/ Wall mountable aluminum enclosure
- External power supply (100V-240V AC, 50/60Hz)
- Backed by 3-Year Warranty
