端口 & 界面
| RJ-45输入端口 |
1 |
| RJ-45输出端口 |
1 |
| HDMI输入 |
1 |
| RS-232 输出端口 |
1 |
| RS-232 输入端口 |
1 |
| DC-IN插口 |
Y |
技术细节
| 类型 |
AV transmitter & receiver |
| 可支持的电缆类型 |
Cat5e, Cat6a, Cat6 |
| 最大传输距离 |
60 m |
| 带宽 |
10.2 Gbit/s |
4K Compliant HDBaseT Lite 70M - HDMI Extender w/ Power over Ethernet
The KanexPro HDBASE70POE is a 4K compliant Transmitter-Receiver set made to extend UltraHD 4K, digital audio, wide-band IR and power over Ethernet (PoE) over a cost effective cat6a cable. It also supports computer resolutions up to 1920x1200, HD1080P/60 with Deep Color. This HDCP compliant extender routes distances up to 200 feet using HDBaseT™ Lite technology.
As an added benefit to the systems integrator - the extender provides remote power from either side Tx or Rx over the twisted pair connection, eliminating the need for a separate power supply at the remote unit. Ideal for use in digital signage applications, healthcare AV, control rooms, educational facilities, airports, commanding centers and home theater.
<b>Please note:</b>
Do not use couplers between the RJ-45/ CAT6 cables, this will cause degradation or damage to the unit. To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded CAT6 or CAT5e cables and use shielded RJ45 connectors with our extender products.
<b>features</b>
- Two-way remote power: Tx to Rx or Rx to Tx using PoE (Power over Ethernet)
- Route uncompressed HDMI signals over Single CAT6a
- Extend up to 200 feet
- Supports 4K UHD resolutions
- Supports HDMI 1.4, 3D, and full HD 1080p/60
- HDCP & EDID compliant
- CEC Pass-through
- Bi-directional IR & RS-232 for control
- Supports all frequencies IR pass through, 5V & 12V, Crestron and Xantech IR control signal compatible
- Front panel LED’s for signal & power
- Supports high bandwidth up to 10.2 Gbps
- Compatible with HDMMX modular matrix switchers
- Locking power supplies included
- Aluminum case enclosure with separate mounting ears
- Backed by KanexPro 3-Year Parts and Labor Warranty
Note: We recommend using a metal STP connector for RJ-45. The shielded layer of cable must be connected to the connector’s metal shell for zero EMI noise and excellent transmission
