扬声器
| 驱动程序数量 |
1 |
| 音频输出通道数量 |
1.0 channels |
| 扬声器数量 |
1 |
| 扬声器类型 |
1-way |
| 放大器 |
Built-in |
性能
| 免提模式 |
Y |
| 内置麦克风 |
Y |
| 推荐使用 |
Universal |
端口 & 界面
| 蓝牙版本 |
3.0 |
| 接口 |
NFC/Bluetooth |
| 无线技术 |
Bluetooth |
| USB2.0端口的数量 |
1 |
| 近场通信（NFC） |
Y |
| 蓝牙 |
Y |
| USB充电接口 |
Y |
能量控制
| 电池类型 |
Built-in |
| 电池寿命(最大值) |
4 h |
| 电源类型 |
Battery |
| USB充电 |
Y |
重量和尺寸
| 深度 |
85 mm |
| 宽度 |
85 mm |
| 高度 |
46 mm |
设计
| 液晶显示器指示灯 |
Y |
| 设计 |
Cube |
| 产品类型 |
Mono portable speaker |
另外
| 产品色彩 |
Black, Green |
| 无线连接 |
Y |
| 开/关切换钮 |
Y |
| 连接方式 |
Wireless |
IPX5 Water Resistant Outdoor Speaker, Bluetooth 3.0/NFC, 3W RMS
This speaker is one accessory that is signed by José Antonio Hermida, world champion mountain biking high in 1996, 2000 and 2010 and three time European champions.
Their IPX5 protection make it resistant to splashes and a light rain.
IPX8 Certification
IPX certification refers to the international standard IEC 60529 grade of Protection who has a component, in this case a Smartphone, when it´s inside a case made in this standard which given protection from other external materials such as dust or water.
IPX Protection scale starts at level 0 (IPX0) where the device has no protection against dust or water.
To the maximum degree of protection of this scale level 8 (IPX8) to be in a full immersion without any filtration.
How to use:
- Load speaker speaker.
- Connect speaker with PC, Laptop, Mac or any 5V USB adapter (not included) with the supplied USB cable.
- The red LED will light and remain on during charging, turns off when the battery is fully charged.
- Disconnect the USB cable when the battery is fully charged.
- The red LED light will flash when the battery is below 21% capacity, emitting a warning sound.
- Link speaker with Bluetooth phones and tablets.
- Keep speakerphone and mobile within 1 meter.
- Turn speaker. A red and white LED light flashes rapidly, indicating that the speaker is waiting for the link.
- Start mobile Bluetooth function and search for Bluetooth devices, once found, select, select BLUESPEAK05 in the list of Bluetooth devices.
- According to the binding process, you may need to enter a passkey (0000) depending on the version of Bluetooth devices.
- After successfully linking the loudspeaker, select BLUESPEAK05 in the list of Bluetooth devices, and press connect.
- Once connected, the color of the power LED remains white.
