端口 & 界面
| 耳机连接插孔 |
3.5 mm |
| 接口 |
Bluetooth/3.5 mm |
| 无线技术 |
Bluetooth |
| 蓝牙范围 |
1 m |
| USB连接 |
Y |
| 蓝牙 |
Y |
| USB充电接口 |
Y |
扬声器
| 驱动程序数量 |
2 |
| 扬声器数量 |
1 |
| 放大器 |
Built-in |
设计
| 音量控制 |
Digital |
| 液晶显示器指示灯 |
Y |
| 设计 |
Rectangle |
能量控制
| 电池类型 |
Built-in |
| 电池寿命(最大值) |
4 h |
| 电源类型 |
Battery |
| USB充电 |
Y |
性能
| 即插即用 |
Y |
| 推荐使用 |
Mobile phone / Smartphone |
重量和尺寸
| 深度 |
22 mm |
| 重量 |
15 g |
| 宽度 |
55 mm |
| 高度 |
80 mm |
另外
| 产品色彩 |
Blue |
| 开/关切换钮 |
Y |
| 连接方式 |
Wired & Wireless |
Bluetooth, Micro USB, 4h, 1.5W, 15g, Blue
Technical Information
Clip-to-Go Portable Bluetooth Speaker
Bluetooth.
Rechargable USB battery buit-in.
Up to 4 hours authonomy.
Hands free function - includes micro.
Output 1.5 W
Weight 0.15 grams
Size 80 x 55 x 22 mm
Clip to go with carabineer, unfold to use as Stand.
Aux-in connect to any music device with Jack 3,5 mm.
1 x BLUESPEAK07 Bluetooth speaker.
1 x Micro USB charge cable.
1 x Users manual.
1 x AUX cable.
How to use
Charging the BLUESPEAK07 (3.7V rechargeable battery built-in)
1- Connect BLUESPEAK07 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable included.
2- Red LED turns ON during charging, turns OFF after fully charged.
3- It takes around 2 hours to fully charge.
4- Unplug USB cable after fully charged.
5- Red LED twinkles when low power (<21%), with indication sound.
6- Long press power button to turn on the speaker, long press again to turn off.
Paring BLUESPEAK07 with mobiles (Bluetooth enabled) and Tablets.
1- Please keep the speaker and mobile within 1 meter.
2- Long press Power button to turn on BLUESPEAK07, blue & red LED blinks quickly, the speaker is standby for pairing.
3- Start the Bluetooth function of mobile and search the Bluetooth devices, after searched, select “BLUESPEAK07” in the Bluetooth device list.
4- After successful pairing, select ‘BLUESPEAK07’ in the Bluetooth device list, and press ‘connect’.
5- After successful connecting, LED changes to solid blue.
Note:
1- If the pairing is not successful, turn off speaker and re-pair again.
2- After successful pairing, paired devices will remember each other. Unless pairing information is deleted, no need to pair when use next time.
3- Pair with new device according to steps 1-5 above after disconnecting existing pair.
Paring BLUESPEAK07 with PC or notebook
1- Please keep the speaker and mobile within 1 meter.
2- Long press Power button to turn on BLUESPEAK07, blue & red LED blinks quickly, the speaker is standby for pairing.
3- Run Bluetooth program of your system.
4- Please use ‘Search new device’ function in the program.
5- Your system should find BLUESPEAK07 on your dialog, and then double click the icon to confirm the program should show the connection has been made.
Pairing BLUESPEAK07 with Mac OS X 10 or above
1- Please keep BLUESPEAK07 and Mac in the range of 1 meter when pairing.
2- Turn on BLUESPEAK07, blue & red LED blinks quickly, the unit is standby for pairing.
3- Pair it with Mac – choose setup Bluetooth Device from the Bluetooth status menu in the menu bar, and follow the onscreen instructions to pair with the speaker. If the Bluetooth status menu is not available, open Bluetooth Preference and select the ‘Show Bluetooth status in the menu bar’ checkbox.
4- Open System Preferences and click Sound.
5- Click Output and select the Bluetooth speaker.
6- Click Input and select your speaker. Adjust the Input and Output volume.
Re-connecting to a paired device
Every time BLUESPEAK07 is turned on, it has one of 2 conditions as below.
1- connect to last connected devices automatically, then just start music playback.
2- be listed in the screen of devices as a output channel, then please select HR908 as output channel and play music.
Hand-free
1- Short press ‘Hand-free’ to answer phone call.
2- Short press again to end a call.
Volume control
Control volume via the paired devices, such as iPhone, iPad, Mobile phones, PC/Mac…etc.
AUX port
1- You can connect AUX port to any music devices via the AUX cable included.
2- Then play music through the devices connected.
