技术细节
| 测量电缆长度 |
Y |
| 自动关闭延迟时间 |
Y |
| 支持板载图形适配器 DirectX 版本 |
RJ-45, RJ-11 |
| 测试类型 |
Transmission testing, Short circuit testing, Shielding testing |
25, 50, 75 and 100 Ohms, 810Hz and 1110Hz, Accuracy +/- 1%, max. 6km
<b>The KETDR 06 can locate the presence of cable faults, including shorts, opens, taps, splices, water ingress and other impedance anomalies, on copper communication cables up to a distance of 6000m (19,800ft). KETDR 06 has with the 3 nanoseconds pluse a “near End dead zone of 0.</b>
Suitable for all types of Communication Cable
The KE-TDR 06 has selectable25, 50, 75 and 100 Ohm impedance ranges making it suitable for use on all types of metallic communication cable including Coaxial and Twisted Pair. Velocity of propagation is variable between 1% and 99%, in 1% increments.
Auto Ranging Scale linked to Cursor Position
The KE-TDR 06 has five measurement ranges, the most appropriate of which is automatically selected by the instrument dependent on the position of the cursor. This function reduces the time spent in the field locating the cable fault or anomaly.
Built in Tone Generator (Oscillator)
With a built in tone generator, injecting an oscillating signal between 810Hz and 1110Hz onto the cable under test, the operator can trace the cable and also identify pairs within a bundle, using KE310 tone probe
Single Shot or Continuous Sampling Output Pulse
For simple faults the KE-TDR 06 can be used in Single Shot mode where a test pulse is only transmitted each time a cursor key is pressed. This function conserves battery life.
For more elusive faults the test button can be held down, whereby the KE-TDR 06 will transmit 6.7 test pulses per second. This rate is 6.7 times that of most equivalent competitive products, and makes the KE-TDR 06 more likely to identify intermittent faults. The Cable can be continous be scanned or the trace can be held for furter analysis by the Scan Lock feature.
Ultra-Bright 64 x 128 Electroluminescent LCD
The KETDR 06 features an ultra-bright 64 x 128 electroluminescent LCD ensuring that the instrument display is clearly visible under all lighting conditions and with adequate pixel resolution to ensure accurate fault location
Built into a Tough Water & Dust Proof ABS Enclosure
The KE-TDR 06 is built into a custom designed ABS enclosure capable of withstanding a drop of 1m onto concrete. It also incorporates an impact resistant ABS display window and is protected against the ingress of dust and water to IP54. These qualities ensure the suitability and survival of the product under extreme field conditions.
