技术细节
串口数量 |
1 |
以太网的数据传输率 |
10, 100 Mbit/s |
隔离度 |
1.5 kV |
网络标准 |
IEEE 802.3, IEEE 802.3u |
串口类型 |
RS-232/422/485 |
数据传输速度 |
0.1152 Mbit/s |
设计
认证 |
UL, CSA,TUV, FCC, CE, FM Class I, Div. 2 |
协议
支持网络协议 |
ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP, DHCP, TFTP, Telnet, HTTP |
其他功能
兼容性操作系统 |
Windows 95/98/ME/NT/2000 |
另外
以太网路(RJ-45)连接接口数量 |
1 |
运行温度范围(T - T) |
0 - 60 °C |
RS-232/422/485, 115.2 Kbps, 1 x 10/100Base-T(X) RJ45
External Device Server
- Connect enterprise (ERP,MES) systems to factory floor devices without disturbing existing control networks
- Allow remote firmware upgrades, saving money and time from manual upgrades
- IAP version supplies many industrial communication protocols
- Configurable serial interface supports RS-232, RS-422, or RS-485
- 10Base-T/100Base-TX Ethernet (RJ45)
- Isolated serial and Ethernet ports
- FM-approved for hazardous locations Class I, Div. 2
- RoHS Compliant
The XPress-DR and XPress-DR-IAP Device Servers allow virtually any serial device to be connected to a new or existing Ethernet network.
By encapsulating serial data and transporting it over Ethernet, the XPress-DR/DR-IAP allows virtual serial links to be established over Ethernet. By using these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility, or across the global enterprise.
When used in conjunction with an OPC server, most Windows based HMI, SCADA, and PC-based control applications have full access to information in the connected device. Existing COM-port based Windows applications can access network-enabled devices using our Com Port Redirector software. Redirector software allows the creation of virtual serial ports, which can be mapped to the remote device servers over Ethernet and connected to the XPress-DR and XPress-DR-IAP.
The XPress-DR-IAP installable communication drivers allow specific support for various industrial communication protocols. With native support for these protocols, devices that previously allowed only one connection can now support multiple connections simultaneously.
Flexible configuration options allow the unit to be set up locally using the serial port, or remotely over Ethernet using Telnet or a common web browser. Included Windows based configuration software simplifies the process of installing communication drivers and configuring them for use with attached devices. Flash memory provides for maintenance-free, non-volatile storage, and allows future system upgrades.
Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet isolation, a wide 0° to 60°C operating range, and a 9-30VDC/9-24VAC power input, the XPress-DR and XPress-DR-IAP are ideal for any industrial application.