联网
| Auto-negotiation 自动协商功能 |
Y |
| 流量控制支持 |
Y |
| 封包转发率（100 Mbps） |
148810 pps |
| 封包转发率（10 Mbps） |
14880 pps |
| 自动 MDI / MDI - X 检测功能 |
Y |
| 双机热备系统 |
Half, Full |
| 存储转发 |
Y |
| 以太网的数据传输率 |
10, 100 Mbit/s |
能量控制
| 功耗（最大） |
4.32 W |
| 输出电流（12V） |
0.36 A |
| 输出电流（48V） |
0.09 A |
| 输入电压 |
10-48 V |
认证标准
| 安全 |
Class 1, Division 2 group A,B,C&D UL60950-1, EN60950-1, IEC60950-1 |
性能
| 缓冲区大小 |
128 KB |
| 最大传输距离 |
40000 m |
| 光纤模式结构 |
Single-mode |
另外
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
| 数据传输率（最大） |
100 Mbit/s |
10/100BASE-TX, 100BASE-FX, IP30, 40 KM, 800 g
LevelOne IEC-1040 is an industrial Fast Ethernet media converter with a rugged aluminum case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes.
- 100Base-FX Single-mode fiber for the link up to 40km
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in hazardous locations with DC Terminal Block power
- DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode
- 128K bits buffer memory
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- 40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F)
- IP30 aluminum case
- Supports DIN-rail installation
