联网
双机热备系统 |
Full, Half |
封包转发率(10 Mbps) |
14880 pps |
封包转发率(100 Mbps) |
148800 pps |
可支持的电缆类型 |
Fiber |
转换器输入接口 |
10Base-T, 100Base-TX |
转换器输出接口 |
100Base-FX |
以太网的数据传输率 |
10, 100 Mbit/s |
性能
可支持的光纤电缆直径 |
50/125, 62.5/125, 100/140 µm |
光纤模式结构 |
Multi-mode |
最大传输距离 |
2000 m |
能量控制
支持以太网(PoE) |
Y |
接受频率 |
50/60 Hz |
输入电压 |
100-240 V |
端口 & 界面
光纤通道端口 |
1 |
通过以太网(PoE)供电端口数量 |
1 |
另外
数据传输率(最大) |
100 Mbit/s |
连接方式 |
Wired |
以太网路(RJ-45)连接接口数量 |
1 |
10/100BASE-TX - 100BASE-FX, MMF, SC, 100Mbps, IEEE 802.3/u/af/x, PoE, 2km
LevelOne’s 100TX to 100FX SC Converters with PoE Injectors allows the user easily to connect different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments.
The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. The converter includes PD signature sensing and power monitoring features. Other advantages include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.
FVT-0203TXFC with Multi-mode SC connector gives your PoE network the ability to interface with fiber connections over a distance of up to 2km.
- 10/100BASE-TX UTP to 100BASE-FX copper to fiber media converter
- Multi-mode fiber transmission up to 2 km
- High-quality SC connector
- IEEE 802.3af PoE compliant to simplify deployment and installation
- Link-loss-forwarding
- Provides Link Fault Pass and Far End Fault
- DIP Switch for customized configuration
- Internal power supply