数据传输
| MAC 地址表 |
1024 entries |
| 存储转发 |
Y |
| 交换容量 |
1 Gbit/s |
| 封包转发率（10 Mbps） |
14880 pps |
| 封包转发率（100 Mbps） |
148000 pps |
光纤
| 光纤类型 |
Multi-mode |
| 传输距离（最大） |
2 km |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 流量控制支持 |
Y |
| 10G支持 |
N |
| 全双工传输 |
Y |
以太网电源（PoE）
| 以太网（PoE）供电总功率概算 |
126 W |
| 以太网供电（PoE+）端口数量 |
4 |
| 支持以太网（PoE） |
Y |
端口 & 界面
| 基本交换 RJ-45 以太网端口数量 |
4 |
| 光纤通道端口 |
1 |
| 以太网铜缆技术 |
100BASE-TX, 10BASE-T |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
性能
| 程序包缓冲区内存 |
1 MB |
| 内置存储器 |
1 MB |
| Auto-negotiation 自动协商功能 |
Y |
设计
| 安全 |
EN60950-1 |
| 墙壁支架 |
Y |
| 机架安装 |
N |
4 x PoE+ RJ-45, 1 x ST, MM, 2 km, 1 Gbps, 460 g
The LevelOne IFP-0504 Industrial Fast Ethernet PoE+ Switch provides 4 ports at 10/100M TX PSE to supply power and internet to PoE+ compatible Powered Devices (PD) in a network setting. The multi-modal fibre IFP-0504 switch supplies 15.4 Watts for IEEE802.3af or 30 Watts (Max 36W) for IEEE802.3at per port, and is configured for large industrial or outdoor networks, with a maximum networking range of 2km. With an industrial-standard DIN-rail mount for easy cabinet deployment or wall mount for versatile network configurations, the IFP-0502 comes in a sturdy metal casing rated to IP30 for installation in industrial settings where humidity, dust, high or low operating temperatures or vibrations could cause standard devices to fail.
- Multi-mode fiber with ST connector for transmission of up to 2km
- Provides flexibility of 4 x 10/100BASE-TX PoE ports
- PoE ports can support the IEEE 802.3at standard and power up 30W devices
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- 40°C to 75°C (-40°F to 167°F) operating temperture range
- Provides DIN-rail, wall or desktop mounting
- IP30 metal case
- Redundant power inputs with Terminal Block
