数据传输
MAC 地址表 |
1000 entries |
支持数据传输率 |
10/100 Mbps |
最大数据传输率 |
0.1 Gbit/s |
其他功能
连通的液晶显示器 |
Y |
非操作相对湿度(非冷凝) |
10 - 90% |
联网
自动 MDI / MDI - X 检测功能 |
Y |
全双工传输 |
Y |
端口 & 界面
基本交换 RJ-45 以太网端口数量 |
8 |
DC-IN插口 |
Y |
环境条件
运行温度范围(T - T) |
32 - 104 °F |
4+4 10/100 PoE Switch, IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3af, MDI/MDI-X, Full Duplex
The device is a powerful, high-performance Fast Ethernet switch, with all 8 ports capable of 10 or 100Mbps auto-negotiation operation (NWay) which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps network with no pain.
This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-and-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and whole system.
- Complies with 10BASE-T specifications of the IEEE802.3 standard;
- Complies with 100BASE-TX specifications of the IEEE802.3u standard;
- Compliant with IEEE 802.3af PoE standard (DTE power via MDI);
- Provides 4 PoE ports with classification identify;
- Supports 15.4W maximum per PoE port;
- Supports over current protection and circuit shorting protection;
- 8x RJ-45 ports for 100BASE-TX and 10BASE-T connectivity;
- Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection;
- Supports MDI/MDI-X auto crossover;
- Wire-speed packet filtering and forwarding rate;
- Store-and-forward architecture filters fragment & CRC error packets;
- Supports 1K MAC entries;
- 768K Bits buffer memory;
- Supports extensive LED indicators for network diagnostics;
- Internal universal switching power supply;
- FCC Class A, CE, VCCI Class A.