LyCOM ST-134M SATA interface cards/adapter

ST-134M, PCI to 4x SATA, 1.5Gb/s, Red - Type 4x Multilane SATA connector with thumbscrews
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Four high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
- Hot-plug capability
- Fully compliant with Serial ATA 1.5G specifications
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on two drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
- Supports ATAPI commands
- Supports Spread Spectrum in receiver
- Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
- Compliant with PCI Specification, revision 2.2
- Low Profile PCI form factor
- Integrated PCI DMA engines
- Four Pin header on board for LED connection
- 32 bit, 33/66MHz fully compliant PCI host interface