Mcoplus MT600N

MT600N - 420g, i-TTL, M, 1/8000s <b>Features:</b>

- 1. The set-top i-TTL flash: Install it on the Nikon camera to achieve automatic flash photography.
- 2. Optical signal SLAVE functions: Wireless remote M mode flash (optical pulse).
- 3. Autofocus auxiliary functions.
- 4. Automatic zoom function, flash zoom position can be back and forth with the change of the focal length of the lens.
- 5. Supporting FX/DX camera frame suitable for switching.

<b>Quick Guide</b>

- Automatic flash: Set the flash to i-TTL mode, can fully automatic flash photography.
- Light trigger slave unit (optical pulse): Press button, set the MT600N to SLAVE, there are three choice SLAVE Nikon/ SLAVE S1/ SLAVE S2.
- The set-top flash: Press [MODE], switch to i-TTL, M, RPT mode, the installed camera can be triggered flash.
- High-speed sync: Form the camera menu, set the auto FP icon turn to “on”, after set the auto FP, your camera can use any shutter speed.
- Auto Zoom: Set A zoom, flash zoom position can be back and forth with the change of the focal length of the lens (20 – 200 mm).

<b>Special Explanation</b>

- MT600N flash as a set-top use, comprehensive support i-TTL function, As off-camera used, only support wireless manual mode flash, but no TTL functions.
- All off-camera mode, SLAVE Nikon/ SLAVE S1/ SLAVE S2 support high speed with step M mode flash.
- If abnormal during use, operate C.Fn inside the System Restore, restore the default settings.

<b>Specification Parameters</b>

- Guide number: 60 (ISO100, 200mm)
- Wireless Flash: Optical pulse transmission Slave
- Flash mode: i-TTL, M, RPT
- Zoom range: 20 – 200mm (when using wide angle dispersion plate is 14mm)
- High speed sync: 1/8000s
- Slave flash: Optical pulse SLAVE Nikon, light trigger S1/S2
- Shutter synchronization: High speed sync, Front-curtain sync and Rear sync
- Flash exposure compensation: Support (with an increment of 1/3 gear in +/-3 gear)
- Bracket exposure: Support
- Flash exposure lock: Support
- Modeling flash: Support
- AF assist-focus: Support
- Manual flash: 1/128 – 1/1 (with an increment of 1/3 gear)
- Frequency flash: 1- 199Hz
- Recycle time: Quick flash less than 2s, ordinary flash less than 3s
- Optical transimission distance: About 20 m
- Optical transimission channels: 4
- Flash groups: Support for A/B/C groups
- Power supply: 4 * AA size batteries (Alkaline or Ni-MH IS usable)
- External interface: Hot-shoe, PC synchronous interface, external charging interface
- Battery life: Flash 100 – 700 times
- Measurement: 79.7*142.9*125.4 mm
- Net weight: 420g (not including batteries)