联网
| 双机热备系统 |
Full, Half |
| 自动 MDI / MDI - X 检测功能 |
Y |
| 转换器输入接口 |
100Base-TX, 10Base-T |
| 转换器输出接口 |
100Base-FX |
| 以太网的数据传输率 |
10, 100 Mbit/s |
性能
| 可支持的光纤电缆直径 |
8.3, 8.7, 9, 10 µm |
| 光纤模式结构 |
Single-mode |
| 最大传输距离 |
30000 m |
| 波长 |
125 nm |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
10/100Base-TX - 100Base-FX (SC), Single Mode, 30km
- Complies with IEEE 802.3 & 802.3u standards.
- Support fiber cable distance up to 30Km.
- 10/100Mbps Auto Negotiation.
- Auto cross over on RJ45 port.
- Support Link-Cross-Check.
- Auto or manually select 10 or 100 speed and Half or Full Duplex mode.
- Strong metal case design.
- LED indicators for status check and trouble shooting.
MPT-H21SCS is designed to meet the needs for optical fiber network deployment for extending a copper based network via fiber cables. It is a 10/100Mbps Auto-Negotiation Fast Ethernet Switching Media Converter to provide conversion between 10Base-T Ethernet or 100Base-TX Fast Ethernet UTP (Cat.3 or Cat. 5) cables and 100Base-FX single-mode (SC connectors) fiber optic cables.
As defined in IEEE 802.3 & 802.3u standards, 10Base-T & 100BaseTX specify the transmission over category 3 or 5 cables media can transmit signals up to 100 meters. MPT-H21SCS specifies the transmission in single-mode fiber media can transmit signals up to 30 kilometers.
MPT-H21SCS comes with one RJ45 connector with Auto Cross Over feature to connect to a 10 or 100Base-TX device such as workstation, hub or switch, etc. via Cat.5 copper cables and one SC connector to connect to a 100Base-FX fiber device via 8.3/125, 8.7/125, 9/125 or 10/125um single-mode fiber cables. MPT-H21SCS will convert the signals between these two different types of cables.
The MPT-H21SCS is a slim and compact unit with strong metal case. It features 6 status LEDs for easy diagnostics and trouble shooting.
