另外
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
1-channel H.264/MJPEG industrial video decoder, 0 - 60°C
<b>Features and Benefits</b>
- Decode H.264 and MJPEG video streams to an analog video signal automatically
- Manual selection or automatic scan with maximum of ›64 video sources
- 2-way (1 in, 1 out) audio supported
- Transparent PTZ control with legacy PTZ controller
- SNMP for network management
<b>Introduction</b>
The VPort D361 are 1-channel video decoders for decoding H.264/MJPEG video streams from VPort series video encoders back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors, multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice-over-IP communication between the video encoder and decoder. Monitoring cameras that are part of a large CCTV system is easy with the VPort D361, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2 DIs located on the top panel of the VPort D361 can be used to create two control buttons for up and down video source selection.
