技术细节
| 串口数量 |
1 |
| 数据传输速度 |
0.230 Mbit/s |
| 以太网的数据传输率 |
10, 100 Mbit/s |
设计
| 安全 |
UL60950, cUL60950, EN60950, ACA TS001 / AS 3260 |
协议
| 支持网络协议 |
ARP, DHCP, Telnet, UDP, TFTP, PPP, HTTP, SMTP, POP3, FTP, SNTP, RAW UDP/TCP, ICMP, IP, TCP, SNMP |
另外
| 内部RAM |
8 MB |
| 以太网路(RJ-45)连接接口数量 |
1 |
1 port, 230Kbps, 1 x 10/100Base-T RJ-45, Flash 2 MB, RAM 8 MB
The MultiConnect device server is a complete, ready to deploy serial-to-Ethernet device server for connecting legacy devices to an IP network for remote monitoring, control and configuration. The MultiConnect provides a high performance Ethernet bridge as well as a complete TCP/IP protocol stack. MultiConnect can make your existing and next generation device, machine, or system IP-ready while you focus on developing its core features.
Serial-to-Ethernet Technology.
MultiConnect provides the powerful ability to IP-enable legacy serial devices allowing more options for data acquisition, device management, and industrial control than would otherwise be available. The MultiConnect includes a processor, operating system, TCP/IP stack, Web server, and a network connection to provide a complete serial-to-Ethernet bridge.
Internet-Enable Any Device.
MultiConnect allows you to network-enable virtually any serial device. Using embedded Internet protocols and a connection to an IP network, MultiConnect sends and receives data over the Internet or Intranet connection.
Reduces Development Time.
MultiConnect can make your existing and next generation serial device IP-ready without requiring hardware changes to its design. MultiConnect actually provides faster time-to-market because it relieves the burden and expense of writing and maintaining Internet applications. The complete, ready-to-integrate MultiConnect device server allows you to enhance your product while you focus on developing its core features.
Management and Configuration.
MultiConnect has several means of management and configuration built into the design. It supports remote configuration, which means you can have central site setup and control of the remote Adapters via the command line interface or telnet.
