音频
| 输出电平 |
500 mV |
| 频率范围 |
3 - 70000 Hz |
| 输入阻抗 |
100000 Ω |
| 输入灵敏度 |
158 mV |
| 动态功率每通道（2欧姆） |
600 W |
| 动态功率每声道（4Ohm） |
410 W |
| 动态功率每声道（8Ohm） |
250 W |
| 桥模式下每通道输出功率（4欧姆） |
1200 W |
| 桥模式下每通道输出功率（8欧姆） |
800 W |
| RMS每声道输出功率（8 Ohm） |
150 W |
| RMS每声道输出功率（4 Ohm） |
150 W |
| 功放分类 |
A |
| 阻尼系数 |
200 |
| 总谐波失真 |
0.004% |
端口 & 界面
| 耳机输出端口 |
1 |
| PRE OUT端口 |
Y |
| 音箱选择 |
A+B |
| AC（电源）输入 |
Y |
技术细节
| 手持式遥控器 |
Y |
| 高音调整 |
Y |
| 低音调整 |
Y |
| 最大输入水平 |
1.2 V |
C 375BEE - 2x 150W, 250/410/600W IHF Dynamic, 123dB, 100kΩ, 50A, RS-232, Titanium
The C 375BEE is far more than a bigger C 355BEE — in fact, it is much closer in spec to the M3 Integrated Amplifier from NAD's high end Masters Series. It also incorporates an updated version of NAD's "Building Block" concept to make the addition of the PP375 phono module or the MDC DAC USB Digital Analogue Converter and other affordable future upgrades possible. Attention to the most minute detail is evident everywhere, from the heavy gauge steel chassis to the sophisticated power supplies and copper buss bars channeling almost absurd amounts of current to the custom gold plated speaker binding posts.
The C 375BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjørn Erik Edvardsen's innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. An improved tone control circuit and revised PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated!
- 2 x 150W Continuous Power into 4 Ohms and 8 ohms
- 200W, 365W, 500W IHF Dynamic power into 8, 4 and 2 ohms, respectively
- PowerDrive™ circuit
- NAD SR 8 Full System Remote control
- Headphone socket
- Front panel Media Player (MP) input for attaching portable MP3 Player
- Relay Input Switching
- Holmgren Toroidal Power transformer
- 7 Line inputs, including two tape in/outs
- All discrete circuitry
- Class A Voltage Stages (Preamp and Power Amp)
- Distortion Canceling Circuit
- BEE Anti-saturation Clamp
- Short signal path from input to output
- All sockets Gold plated
- Tone controls defeat switch
- Main-amp input & 2 pre-amp outputs
- Speaker A + B outputs and switching
- Soft Clipping™
- IR Input/Output
- 12 volt trigger out
- RS-232 serial port
- Detachable IEC Power Cable
- Optional PP375 MC/MM Phono Module
- <1W Standby Power Consumption
- Free of lead and other environmentally dangerous substances
