音频
| 输出阻抗 |
10 Ω |
| 频率范围 |
10 - 20000 Hz |
| 输入灵敏度 |
446 mV |
| 动态功率每通道（2欧姆） |
785 W |
| 动态功率每声道（4Ohm） |
480 W |
| 动态功率每声道（8Ohm） |
280 W |
| 总谐波失真 |
0.003% |
M3 - 10Hz - 20kHz, 0.004%, 23500g, Grey/Silver
With 2-channels of 180-watts of pure power, we're quite certain the M3 meets the outline of our technical brief which reads, "The industrial design must create a physical presence that is powerful, dynamic and solid, yet refined and elegant." We're certain we've met the challenge of this outline as well as your personal requirements.
The M3 includes an entire host of convenient features to allow seamless integration into virtually any listening application. The M3 offers internal switching for two pairs of speakers and tone controls as well as a second Zone 2 output with independent commands and even its own remote control.
Front panel controls allow for direct access of all features as well. Performance features are many, and include a precision volume attenuator with 0.5dB steps and a range of 87.5db, a remote balance control with 0.5dB steps, and a Mode control which allows stereo, left only, right only and mono settings. Tone controls offer bass and treble adjustments as well as a "spectral tilt" option that is highly effective at correcting the tonal balance of many recordings by simultaneously increasing the bass and decreasing the treble (and vice versa) to create a warmer or cooler balance. There are also a second set of preamp outputs and a switchable high-pass filter for the internal amplifier, to allow easy implementation of any active subwoofer or for bi-amplification.
M3 Dual Mono Integrated Amplifier Features
- 180 watts X 2, 10Hz - 20kHz, with 0.03THD, both channels driven into 8 or 4 Ohms;
- Dynamic power of 280 watts at 8 Ohms, 480 watts at 4 Ohms, and 785 watts at 2 Ohms;
- PowerDrive;
- Dual stage high current/high voltage power supply;
- Dual Mono topology;
- Twin NAD Custom-Made "Holmgren" Toroidal transformer;
- Ultra precise multi-stage electronic volume control using discreet resistors;
- 7 inputs, including 1 balanced XLR;
- Tape/Zone 2 output (independent source selection, no volume control);
- Speakers A B with custom 5 way binding posts;
- Biamp mode with selectable 40, 60, 80, 100 Hz crossover frequency on Pre Out 1;
- Powered subwoofer;
- Main Amp input;
- Remote Bass and Treble controls with Spectral Tilt option;
- Remote Balance control with 0.5 dB steps;
- Selectable Mono, Left, Right, and Stereo options;
- RS-232 interface for advanced custom installations;
- 12V Trigger for advanced control options, 1 Out;
- 3.5mm IR Control jacks, 1 In and 2 Out;
- Detachable AC cord;
- M3 System Remote Control;
- ZR 3 second zone remote.
